Search results

I loved that show!

Red bullitt pics?

How high are your fenders from the trailer floor? I do want the 5k axles so I can also carry a crew cab f350 if needed. Not interested in lowering my car its hard enough to get in & out of! I wonder if you put a smaller tire on it to help the angle of the ramps & coming onto the trailer?

Looking for advice from those who have car trailers. I know I want 5k axles but unsure about height of the deck & ramp length so it doesn't drag going on & off. Thanks

I've got a 2016 ford escape that has done the same thing.

Who makes this battery?

When my car was new if you took off hard when the transmission was cold and then slowed to a stop it would sometimes have a very hard downshift into 1st gear. After I found out it's better to let it warm up before getting on it I let my car idle long enough for the engine to come up close to...

Mine took 8 quarts

Mine was setting over night & when I took the factory dipstick out no fluid came out but mine was at least 1.5 quarts low from the factory. Now after the refill & setting over night with the engine off the fluid level is right below the fitting where the very top of the dipstick comes out at the...

I bought one of these. Removes the fluid & puts in back in no problem. The small tube that comes with the pump will go all the way down the new dipstick tube. Cut the very end of the plastic tube at an angle will help it slide down the dipstick tube.

Yes it was the eBay model. No modifications. Hardest part was getting the hose started on the fitting that screws into the transmission.

For my fluid level on this dipstick the very tip of the stick was approximately the 5 mark on the factory stick. So when hot the fluid level was at the very top of the bulb shape of the end of the dipstick where the bulb stops & the dipstick starts the flat area. This is the 4 mark. When cold...

Just remember to check the fluid level by unscrewing pull out the dipstick & wipe it clean. Then reinsert the dipstick but don't screw it back in. Push it till the threads touch the pull back out. When turning the knob to screw in or out it causes the dipstick to spin & flop around giving a...

I have visited Arlington and saw his grave and all the others as well. This is a very sobering place to see in person. A very huge thank you for your service to this country, for all who served, and are still serving. Above all to the service members who gave the ultimate sacrifice. We all enjoy...

When I did this I did remove the cap & dipstick with the engine off & cold transmission. But this was the factory fill & come to find out it was about 1.75 quarts low. So with the correct amount of fluid I don't know if it would come out when removing the dipstick cap dead & cold. I know that...

Check your hood latch safety switch. If you try & lock the car with the fob with the hood up the horn won't honk with the double press of the lock button.

.

I have already installed the fitting in the transmission so I can't show you how the marks line up because there is no frame of reference but in this picture you will see the end of the fitting that screws into the transmission where the factory cap goes. Make sure the factory dipstick is fully...

I didn't take any pictures of the factory dipstick level hot or cold vs this new one. Didn't think about it. Too late now.