Search results

You live in Florida...if you push the button to start the car and pull out of your driveway, you need an upgraded intercooler. There is no "style of driving" that's going to cause the intercooler to heat soak less in a high heat high humidity market. I added a Mishimoto IC to my car when it...

Add FLP and FLP_DSD to your monitored gauges, they should both be close in value. If FLP is at 0, your sensor is bad. That’s how I found mine, aside from the code stored for low fuel pressure.

Same here...3rd evap and about to go in for another. FYI...all warranty replacements are covered for 12/12 according to my dealer, so if you fall in that window it will be covered again.

Old post, but with all of the fuel economy talk lately I figured this needed to be bumped back up. Mine read super high prior to calibration, but has been mostly dead on over the last 2 years after adjustment.

https://www.mustang6g.com/forums/threads/how-to-adjust-your-indicated-average-fuel-economy.48903/ Was just thinking the other day that this post needed to be bumped back up with all of the recent talks of fuel economy. Mine has been calibrated now for almost w years, and is never more than 2...

I’m still searching for a reasonably priced FPP box to do just that. I’ve been running with the stock box for the last 15k miles and definitely have zero complaints, just curious to see if the box is actually needed or not.

No, the CJ link works fine for the chrome lugs they sell, the part number I listed is for a stainless lug that CJ doesn't carry. I'm not much of a fan of plated lugs generally, but in smaller sizes they are damn near impossible to find that aren't plated.

Found Gorilla 91148SS lugs on their website, but can’t find a reputable shop that sells them. Might consider the chrome ones CJ sells if I can’t find them, but not 100% sure the 13/16 or 21mm socket would fit (currently lugs are 19mm). I like the McGard lugs that Spart has used on his, but the...

Just as the title says...lugs that came with the wheels all have the clear coat peeling off and look terrible after only one year. Anyone found a decent quality lug that will fit the small opening of the MMR wheels that’s not a spline drive? The only splines I would consider are McGard, which...

I have Formula One Pinnacle 30% on my car, and it definitely has a slightly green hue to it as most Llumar films do. I don't think you're going to find a pure black/charcoal for these cars since the OEM windows have a slightly green hue to them, closest you're going to get is probably EWF...

Would love one of these in a slightly smaller profile that doesn’t stick out past the wheel well (stealthbox sized). Might have to reach out and see if there’s any way to modify the fit, and make it for an 8” subwoofer.

Ah hell, missed PP. You have the mechanical gauge in the center of the dash instead of the cluster gauge.

Had it since new? Any software updates or cluster replacements that you know of?

I have the exact same rattle after the evaporator was replaced for the third time last October. Pressing down on the dash near the defroster vents seems to stop the noise, but removing the grille doesn't resolve it. I would say there is something loose behind the dash for sure, but I haven't...

I would absolutely fight it! You don't want your car tagged with "odometer discrepancy" at any point unless you like rapid depreciation. They should have had the original cluster programmed with the correct mileage before it was replaced, and it should match the ECU exactly. THIS is why I...

Stock replacement IC and FP tune, and be done with it. No need for an exhaust unless you just want some fart noises to come from your car. Stock IC is junk, especially if you live in a hot/humid area, and the FP tune provides a lot of under the curve gains that really make the car a lot more...

Same here...too many people IMO trying to make a "quick" car fast. The EB was never meant to be a GT/GT350 killer, nor is it ever going to do it reliably. If that was an option, it wouldn't be the aftermarket doing it for sure. For some crazy reason i'm still rocking my EB for now (although...

:ford: Well...I can prove that what you heard is false. I have the most current part number installed in my car (10/2017 infact) and within the next couple of weeks it will be going back for another. There are multiple part numbers because it’s not just the core that’s replaced, it’s the...

You're in Florida, you'll replace it again. If you get it, purchase an extended warranty for sure. I'm on my 3rd evaporator, and will be putting in #4 very soon (blows warm air out of the drivers vents now unless I have the temp set 3-4 degrees lower). Ford refuses to assist with replacement...

AUTO will use dash vents most of the time when cooling, and floor vents when heating. If air is being recirculated without much heating or cooling, it will use blend mode. This is typical on most cars with automatic climate control due to the fact that cold air falls and heat rises, thus...