Search results

Ran them for a few years. Really breaks up the front end a little bit similar to a gt350. Plug and play with the original screw for the fog housing. Had them painted triple yellow, can obviously be repainted. $100 OBO...

https://lightwerkz.net/products/cold-glue-tool-set?_pos=1&_sid=a5dff5f68&_ss=r Lightwerkz is the most knowledgeable in the business

Hello all, sending custom made WinJet based grill with remote control color changing Halos. Dedicated turn signal interupt functionality as well for them to flash with your signals in amber. $175 shipped.

Can someone confirm if the DieHard Platinum AGM Battery, Group Size 96R, 590 CCA Part # 96R-AGM battery will fit in our battery location? I'm do for a replacement and while id love to get a XSPower D4700 like my other car I can snag one of these DieHard AGMs for about $170. With that being said...

No, you will need to do some trimming and cutting fab work.

Ok? VLANDs are also totally different from WINJETs. I never said VLANDs do. But clearly WinJETS do.

You need to depress the clip on the back of the grey connector and pull the black holder straight out.

You have the same thing. Grey connector > Black bulb holder > bulb. Each 3 items are Independent of each other.

Circuitry being used with RF interferance. Company should of used Ferrite rings to help kill the frequencies.

Does anyone know if there's an always hot wire in the trunk?

Not sure whats so difficult or dirty mess about properly cutting open lights. Its called compressed air. Again, your approach of cutting them open was not really cutting them open. You melted a chunk out of the bottom headlight to replace a specific part and fought the small hole the whole time...

Some things

Option 1: Cursor mode will be closest to your wanting. Besides that, to get what you're asking you would need to crack open the tail lights and adding the custom sequencing yourself. I know of a few places that do this but its not cheap.

Good instructional videos. I however disagree with some of your techniques and can provide some more tips. First it's probably beneficial to explain some of the products and I reasons to go along with whats happening here. There are two main types of ways that headlights are sealed. The older...

Is anyone aware of an always hot wire in the trunk that is easily tappable? Before I start checking figured id ask the crowd

Np. What I meant was when you open the DD app on your phone, do you only see one device\controller appear? And if you do and you then set a color do the gills\demon eyes always go all the same color? Aka you cant control the gills\demon eyes individually? Also are the gills triggered manually...

Most likely bad connections. The engine had nothing to do with the chips inside the headlights which leaves the drivers, controller and physical wire connections. It's pretty straight forward. Do you have two separate controllers for your demon eyes or are the demon eyes and DRLs tired together?

Not really. At the time I wanted a clean car with low mileage for around $20k and I got that. Two years and tons of fun later I spent maybe $7k enjoying myself. Last I checked that's no where near a GT350. And even if I was anywhere near a GT350 territory Id rather have a "lower valued...

Do either of you have any advice on the GT questions? That's really more so what in looking for this thread to be about