Search results

So I had a friend get me the navos harness which I only got for the gps but the gps has the wrong connector. So I'm wondering if I try to make it work. Spend an extra 130$ so 250$ on the hellhorse harness plus 40$ on a gps antenna or try to repin my own harness but hextall never published the...

Hi, so I just received the final piece I need for my sync 3 upgrade in my 2017 using a sync 3 bezel, scree. And apim out of a 2018. I see a few threads where they mentikm the forscan changes needed are different if you have a performance package and the other threads with forscan lines have...

Do the codes matter between perfmance pack and non pp? I'm doing the sync 3 swap today in my 17 gt pp with a navos harness but I can't find any list of forscan changes I need to use

Yeah the selection is better o American muscle but I can't stand behind their business especially if I have to have others order everything for me to different addresses. If Amazon Facebook, CJ and lmr don't have it then I'll have to find some more sites. Hell I ordered a bunch of stuff from...

Yeah, I had a friend order the navs harness for me since apparently my card name, IP, and address are all blacklisted so I can't even use my cards either it's all blocked. It's all for. 2021 I got some koni orange struts, lowering springs, and tires from them. Tires were the wrong model, support...

I'm not sure there are any good options, hextall support says eBay ones are junk, hellhorse ones don't work, and Amazon ones are also junk. The only one that looks remotely appealing is the navos one on American muscle but my address and name and number are permantly banned from ordering from...

It went poorly. Got to the bottom but no space to move it. Drill bits kept breaking and the bolt isn't straight down so the bits started walking and well I missed the bolt entirely almost and the hole is an over and extremely crooked but it's a hole. It tapped very very loosely to m7 so I'll see...

But what did you use for the gps and does that let you keep the backup camera? I saw that one but it looked like less wires than one of these...

I know this post is old but do you have any other recommendations? Hextall does not sell a harness for the sync 3 swap. I'm also looking for a harness and can't find any good sellers.

Looks like I'm ordering that harness then. American muscle is claiming there is a chargeback in my account and won't refund the order OR ship it until the dispute is removed except there is no dispute. My bank has no record of one and I've never filed one. This is why I don't use American...

This is my current temp fix to the the car to the garage. I'm going to just try vice grips from below to turn the bolt out and if that fails I'll drill and tap. I work as a welder and fabricator so drilling and tapping holes is nothing for me. Which I had some good drill bits with me though. And...

I figure those threads are so rusty I'm going to need to tap them regardless. So I'm thinking I'll start small and then end 1 drill size or wire size or whichever size it is I need to be at the next tap size up and then buy a random bolt from home Depot or something. I can't find the OEM bolt...

With it right it shouldn't spin against each other so I believe in fine there, Ive done a few connections before and haven't had any issues and in an old car (06 civic) I found it hilarious how they ground the car. There was a bolt on the trunk that the factory had 8-10 wires all grounded to the...

Few updates, I managed to get an inspection camera below it and it appears to just be a nut and the. Open space so I'm going to drill the nut slightly bigger and then tap to the next bolt size I can. This is what the ground is currently at my battery. Just one of those ring attachments. Am I...

I would put the ring of what I'm adding on on top of the existing ground so that it gets a good contact between the too and make it tight so it has no issues. It's currently grounded to the battery but the cable is a bit short and I'm redo it all eventually when I get around to taking the bumper...

I know what size the OEM is since I can measure it but I'm. Not sure what the part number is to order a new one. That's my issue. Hell even if I drill it.ooem I done have any bolts ATM I could use for this that are quality or strong

I'm not sure exactly why, but the car won't start with it not connected. It's just a ground bolt for the massive thick wire harness in the engine bay. ATM I don't have any wire even close to as thick as what's there to extend it with either

So do I attempted to find an OEM bolt.ormjust get a bolt a size or 2 bigger and drill and tap it out to that size?

The bolt remover I have is one of those drill it partially then it's supposed to bite and remove it, it's the speed out or something from home Depot. It barely works on not rusted bolts so I'm not confident it will work on this one which is very seized. I'll try it after work tomorrow but I...

So I wanted to ground myights via the bolt on the strut tower (took power from knee.of the bolts in the fuse box), bolt feels really tight but i figured it's just tight. Well if snapped. And it snapped down low so I can't weld a nut to it. How should I go about removing it. I'm not sure what's...