Search results

@John S that is a really nice set up! I really like the rest of your mods as well. Really contemplating on switching over to the Pro version of SS3's or adding a light bar below the bumper beam, mounted in a similar way like you did. Great job on the install!

The fog lights enhance night time visibilty. Diode Dynamics SS3's have different options ranging from being road legal and off road only. It just depends on how you want to use them. For more info...

New SS3's available in dual color output! Pretty cool option if you're not sure what color to go with. The power level is advertised between Sport and Pro. Only a few left though. https://www.diodedynamics.com/ss3-dual-color-led-pod-pair.html

Heads up! Diode Dyanamics is having a 4th of July sale. You can get 20% off the SS3 Fog lights.

Here are the drain holes I mentioned earlier. Not sure how this works if the VHB is also meant to seal the perimeter. There was barely any of it actually stuck to the trunk. Poor surface prep or inadequate for the application. It may have disbonded over time from repeated exposure to tension...

I have the same problem. I discovered that the design actually causes this. The mounting locations are inadequate, because they allow the wing to rock back under force. The only thing preventing this wing from rocking back is the VHB near the forward most edge of the mount. Over time the VHB...

Options have been added to include the OEM Ford Fog Light / Headlight switch and ForScan Cable for a near complete package. Now also shipping out to the rest of the world!

I think most folks are just tapping into the headlight harness with the provided posi taps. The fogs come on whenever the low-beam headlights are on. There are a couple who have gone the OEM route and purchased the headlight switch with the foglight button. That however, requires a...

@Rynoe, thanks for sharing your post and the positive feedback. I'm glad your happy with the kit and hope to see more folks share their experience. I'm sorry you had a hard time installing the spacer, but rest assured you have adequate clearance between the housing and the support bracket. It...

Just a heads up, the SS3 fog lights are on sale through Diodedynamics.com for memorial day. Link below... https://www.diodedynamics.com/ss3-sae-yellow-sport-led-pod-pair.html

Just a heads up. For some reason, some of the yellow/amber lenses are on backorder. You can probably go with a kit that you will likely be happy with. And if your not satisfied, swap out the lens with a different pattern...

Lol this is partly why I don't kit the adapters with fog lights. Do you do a lot of night time driving? Canyon runs?

Yup, link to my shop is in my sig. Here: https://ace-engineering-2.myshopify.com/

Small update, I was able to source the connectors and invested in the tool to crimp the terminals. The harness in the kit will include the connectors now for an easier install. No more splicing and dealing with heat shrink.

Thanks Woodie! Link is in my sig, and you can purchase the lights on Amazon Prime or directly through Diodedynamics.com.

Thanks John! Are the other lenses compliant as long as they are aimed properly? Or just the SAE Fogs? Per California Law: Cvc 24403B "On a motor vehicle other than a motorcycle, the foglamps authorized under this section shall be mounted on the front at a height of not less than 12 inches nor...

Ah cool! Same as me, I figured it would be adequate for just driving around town. But if your the adventurous type and like to do night time canyons runs like omgbuilds, Max is the way to go! Also, a good review:

Thanks for the order! I'll ship it out first thing tomorrow! I'm curious how bright they are. Are you planning on going with Max on the Mach as well? And what type of lens will you go with?

Send me your info through DM, we can do an exchange.

Printed some plain adapters without the hexagonal pattern. These are available now. Textured on all the exposed faces, so you can't tell they're 3d printed.