Gotcha. I'm curious as to the difference in those 2 wires?? i'm guessing both are for power, but act a little different? And this might sound dumb, but would I need to notify the tuner to make any modifications in the tune??
Thank you Beef
Beef, you using the yellow gray wire for trigger source?? My installer used the purple with green stripe wire. Could this be causing my pump or pumps to run for 3 solid minutes when I simply open the door??
Palm beach dyno is doing the tuning. I'll have to check and see if it has the check valve....i'm not sure. I know it was the tripple pump kit from Fore Innovations. I wonder if the check valve is something that has to be added to this kit!?
So i just got the whipple kit installed along with FORE Innovations level 3 setup on my 19gt and I got a question about the remote start process. NOW that the kit is all installed, when I try and remote start the car, the engine will turn over for 6 or 7 or 8 seconds before firing up. Does...
Well, what's odd is on my way back, I stopped for 1 hour to rest and when I cut the car off, the pumps kept running for like 10 mins then they shut off. I didn't think much about it. Then when I woke up, I tried cranking the car and it turned over for about 6 seconds and then fired right up...
So I got 19 gt with whipple kit and also installed is level 3 fore innovations setup. Car runs good on first round of tuning...no issues this far. My question pertains to the fore innovations setup....it seems the pumps continue to run sometimes when the car is cut off and also when i open and...
PBD tune, 3.625 pulley, level 3 fore fuel system, headers, full 3" back. Doing a small break in period then on to 93, then another break in and going E85.