Search results

White metallic tri-coat with Project 6GR satin graphite wheels. Staggered 19" setup. MPSS 305/35/19 and 275/35/19. Lowered on Steeda Ultralights.

I would never use a car wash, touchless or not. A touchless won't cause swirlies, but it also won't clean as well vs if you did it yourself. Use the two-bucket method, get a soap with lots of suds and a quality wash mitt like ones from The Rag Company. Wash one side of the car, then rinse, do...

To put some closure to this, Steeda told me to check the endlinks, which were fine. Problem ended up being a loose strut nut. I hit it with the impact pretty good when it went on, but I guess it wasn't enough.

I just installed Steeda Ultralights this weekend and put the driver's side endlink on the wrong side of the strut. I got a nasty clunk from that so I found and fixed it after my 1/4mile test drive. After that, I had some pretty minor clunks. I wouldn't even call it a clunk but more like a small...

I'm doing springs and the bump stop that came on my base car looks like it's one off a PP. The regular ones look a lot longer after watching CJP's video. How in the heck do I have these or did they change it up in later years? I'm more curious and surprised than anything.

I would sell the V6 (or keep it) and get the Vette, but that's just me. I would daily the Vette because why have such an awesome car and not drive it? Yes, there's snow, but that's what snow tires are for.

That make sense about the parts. In a nutshell, if the part isn't one of those on page 2 here https://performanceparts.ford.com/warranty/include/pdf/Select_Parts_Warranty_Statement_2017v2.pdf then you can throw your factory warranty out the window. So basically, Power Pack 2 = OK for full 5/60...

I'm curious as to why Ford would possibly deny coverage after 3/36 even though the powertrain warranty is still intact for 5/60. The way the FP warranty reads states that the components of the PP are covered for 3/36 and that it does not void the new vehicle manufacturer's warranty. If that's...

Could anyone confirm if what I circled in the picture is in fact the FM antenna cable port? Also, is this the correct FM antenna adapter to plug into the factory ACM? https://www.crutchfield.com/p_12040EU10/Metra-40-EU10-Antenna-Adapter.html?tp=2569 I have a base model that I really want...

I know this is old, but I saw that you were going to try to swap the ACMs in your base so you could get Sirius. I want to do that as well, but without the Sync 3. The part I'm hung up at is which module to change in FORScan and to what value? Wondering if I just use the Sync 3 value. I saw...

I would like to know this as well. I hardwired mine in yesterday and noticed some crackles that seem to come from the tweeter. It's not anything bad for me though. Edit: I'll add that I used a fuse tap instead of tapping into the mirror. Typically it's a grounding issue if the static gets worse...