Search results

I learned something new also! I'm a retired old cuss and I have 3 creepers and 1 rolling stool that I have collected in the last 45 years. I never knew the word creeper morphed from the lay flat on the ground rollers to creeper stools, engine bay creepers, and interior creepers. What a world!

I don't know if getting to the turn signal lights requires bumper removal. If changing the turn signal bulbs doesn't require removal of the bumper, then it is far easier to remove the lower splitter and then remove the belly pan as I outlined above. I think trying to pull the bumper with the...

@MACHtobers Very Own - Why do you need to pull the belly pan?

......and the plastic rivets and screws attach the belly pan to the top side of the upper splitter. So unless you plan on pulling the belly pan off with the front bumper, I would just remove those plastic rivets and steel screws to drop the lower splitter and then remove the belly pan after...

I am not familiar with removing the front bumper, but if your goal is to remove the belly pan, then you still need to remove the belly pan fasteners I mentioned in item 2 above. I don't think you want to wrestle the bumper and the belly pan at the same time as the belly pan is unwieldly by...

I have removed the belly and re-installed on my HP. 1) Remove the lower splitter - this is a combination of ~10 bolts and plastic rivets. You may want to record which holes had which fastener for re-installation. Some rivets are in a deep well so they can be a pain. I drilled the center of...

Here is an alternative funnel system that I use made by Lisle Tools. It is Lisle part number 19912. it is expensive, but you likely won't need another funnel again. 19912 Multi-Application Oil Funnel Set, 14 pc. | Lisle Corporation

The same as you, I was concerned about the process. After getting the car back, I checked over most everything and all looked fine except for the splitter. After dropping the oil pan, the Tech will have to wait overnight for the engine oil to stop dripping. Otherwise, they will not get a good...

I went through the same thing on my '22 Mach. https://www.mustang6g.com/forums/threads/mach-1-oil-pan-replacement.193105/ Oil pan replacement was required. Unfortunately, this will mean that they have to drop the front subframe. Overall, the dealer did a good job except they installed the...

Thanks for the compliments - a lot of time and energy went into the Cobra to get it to this point. Unfortunately, the Coors Light girls were on duty that day and were not free to jump into any hot rod as their handlers were staying close by while watching for shenanigans.

I just added my experience in the other thread also.

Lots of sage advice here for a prospective Cobra owner. I own a Superformance Cobra that I purchased in 2002. I cannot recommend Superformance enough. The car arrives as a rolling chassis and you (or an installer) install the drivetrain. The chassis arrives painted, interior installed (wool...

I use Invisible Glass also as many others here have mentioned. I also use Griot's Garage PFM Crinkle Glass Towels. These towels are the bomb! I have always been fussy about clean glass and this is the most streak free combination I have ever used! PFM® Crinkle Auto Glass Towels, Set of 3 -...

What is going on with the rear wing in that picture? And I hear you about delays on 2022 Mach 1 HP ordering. My loaded 2022 M1 HP order took 1 year to the week to get.

I ordered my 22 Mach 1 in Oct of 21 (the first week the 22 model year ordering opened up). The handling pack was $3750. The car was delivered a year later, and the window sticker had the Handling Package price of $4500. That is a 20% increase in 1 year! The dealer honored the original...

On the Mach 1, Telematic control unit - modem is Fuse #8

Which setting did you turn off?

Ford Pass has always had the correct picture of my configuration right down to the caliper color. White HP, same as OP. Although on second look, the app picture does not depict the front wheel well extended molding that HP cars have.

Is the factory warranty on a Canadian market car valid in the US? That would be a question I would have for a Ford dealer.

I can confirm this is the correct part number.