Search results

I was gonna order those but I actually decided to wait cause I found some 4x4 twill carbon pieces that matches the fake carbon texture on the s650 door panels so gonna do it in matte 4x4 carbon

Bolt pattern should be the same, considering all the aftermarket seat bracket companies like planted are now advertising s550 for "fits s550 & s650" as there brackets are molded over the factory floor bracing and bolt pattern

The seats are the same as the S550, even the rears, so should be a good swap 😎

I'm going to have to buy oem puddle lamps as the aftermarket I took apart, it has a film on the inside of the lens but has 3 alignment circles cut out and both are non adjustable

Alright so when I unlock it both lights come on and every works buuuut I wanna know from the premium guys, does your pony look sideways? Or is it perfectly horizontal to the door

Also was yours plug and play or you had to run wires? Because if yours was plug and play and had the wires existing and just has non premium mirrors then you may have to activate the puddle in forscan

I got everything wired and everything works, on the electrical diagrams, the pinout on connector C2280C say puddle left but I spliced in both puddle lights straight at the connector to the BCM which is perfect, if I open left, the left one comes on, if I open the right, the right one comes on, I...

Update: I got my driver side yesterday and already precut the latch surround and everything was plug n play except the window switch.. it was but wasn't and I'm not sure if it's because I got a memory door panel vs my Base but pinouts were wrong which after research that the door has a module in...

I tapped into fuse 23 for the windows, that way it turns off when ignition is off, I forgot the type of fuse we need gimme one sec, there micro2 fuses, I have done it on mine, I took out a rubber block that is inside the passenger quarter trim and found a perfect size spot for the "brick"...

I finally got my turn signal mirrors in with the heated mirrors and puddle lamp options, funny story is when I first bought my Base S550, I bought the sequential turn signals for the mirrors because I planned on doing this 2 years ago and forgot i had them. Anyways, now I installed the...

It's a little difficult to work the app and edit and change pretty much anything on here but once you play with it, it gets easy, I also found this that works for our S550s but has anyone used one https://catalog.pac-audio.com/catalog/can-integration/cp1-s

I've been wanting to do a digital dash in my 19' ecoboost base, I did the premium cluster plug and play and changed coding to activate mycolor, but now I want digital dash and lots of you liked my S650 Door panel thread, I've been researching and found an app on Google that's called realdash...

Who wants to pitch in a go fund me to confirm this dash swap will work 😂

The issue would be the additional features the new s650 has to communicate to the s550 vice versa, I'm pretty sure the dash will fit with small modifications as comparing photos of clips and mounting points, the center console and dash look doable with most factory screw and clip points landing...

Theoretically, I wanna try that next but my issue is gonna be to wire the dash up with the additional modules to run the dual screens as it replaces our radio panel

Well I mean since I'm the first to research and confirm the door panel fitment with slight modifications and have both door panels, any questions you guys have, I wanna help solve them even if it doesn't serve my needs, everyone here helps each other so I wanna throw in my 2 cents too 😎

I have confirmed something about the S650 door pulls on our S550 door panels, you do have to remove the extra ear on the S650 piece but besides that, it's a perfect bolt in

Actually wanted to clarify on this, I will be taking apart the new panel coming in again sometime this week or next but the silver pull handle on s550 did bolt up perfectly on the s650, I did notice that the s650 pull handle had an added mount for x2 screws on both sides where the s550 had x2...

Also Facebook is toxic for custom projects like this 🤣 got lots of hate lol but I'm posting an update since everyone on fb gave me hell even though I said it's not finished on the cutout of my door latch Looks factory when looking straight on but let's be honest, door gonna be shut most of the...

The hvac on the s650 door panels lined up perfectly with the S550 dash buuuut.. Here is the underside dash of the S550 And here's the S650