Now this might be because I'm not using the right techniques but when ever I launch the car I turn off traction control and hold RPM at 2500 and drop the clutch and at the same time I floor it the car lurches forward hard like a proper launch? But then it like I lost all power like some sort of...
I can't load pics with my phone but as far as washers go the bottom was 11 washers top left 4 top right is 6 and when you take the pedal assembly off its on posts so when you tighten it down It pulls the pedal up and to the left and as far as holding up I've been doing some pretty spirited...
Hay guys I came up whit a way to use the factory pedals pretty cheap and with good results so Far I know there is a steeda heel and toe kit and the accelerator pedal extension is only $25 but I wanted to try something different instead of putting on a pedal cover I came up with a way to bring...
This is what I can find on penzzoil I think I'll be going this route http://m.pennzoil.com/motor-oil/pennzoil-ultra-platinum-full-synthetic-motor-oil/ next is to figure out a good manual transmission oil
Reading even more on syn oils and add packs ??? I'm kinda lost I'm torn between penzoil and amsoil m6pwr what are your opinions you seem to have a better grasp on syn oils any info is very appreciated!
Thank you very much for the info I have just started looking at the additive pack for certain oils this is the first time I've ever looked at things like this but from what I can gather from jeneral searches on Google amsoil full synthetic 10w30 seems to be a winner it's also rated pretty high...
Getting ready to do first oil change after 1000 miles I've read alot of rave about redline oil from people that have turbo cars anyone here have any experience with redline oil is it worth what weight would you get?
Do you have pictures of the exhaust on the floor catless dp to the tips and this is a true 3 in all the way to to the back correct it doesn't go down to 2.5 after the the y?
It's something a good bit of ecoboost owners are dealing with right now ford is in the works for making a calibration for the p0300 code just erase it and keep driving it won't hurt anything