Search results

There is no bleeder on Mustang hydraulic TOB. To bleed you need to apply vacuum at the reservoir let it hold at -20" for a minute, release, pump pedal 20 times and repeat. You will feel a difference in the pedal if air was still trapped. Repeat until pedal is firm. One other issue with the Hyper...

Road Atlanta with Mustang Club of America. First time out after having cage installed, car is now 3780 with driver and fuel, vs 3950 before. Michelin S8M scrubs.

Transmission is sold and on its way to its new home. Thanks

Thank you

I wish to order one but need to be assured that it will be the one with ports for the cooler and additional fill hole. Let me know. Thanks, Steve

February 2018 Build Job 2 PP2 car.

Bump, make offers. Thanks

For Sale 2018 MT-82 D4 taken out of my PP2 car at 2200 miles. Trans is as new, Includes factory clutch and flywheel assembly. Free pick up in NYC area save $200, will meet within 75 mile radius of 10573.

For sale 2018-21 Mustang GT CAI, also has silicone adapter and clamps to use on 2015-20 GT350 and 2019-20 Bullitt with 87mm TB. Tube is wrapped in DEI Gold reflective heat foil. Price is $250 +$20 shipping. Pick up is free, zip is 10573 and I will meet in a 50 mile radius.

Sorry folks this item has SOLD.

I get 4 12" Concrete blocks with pieces of 2"x10" on them and lower the car with the tires on them to load suspension. Keep jackstands positioned under the pinch welds but not touching just in case for safety. You can also jack under the spindle until the shock compresses enough that it lifts...

If you want to save aggravation and possibly damaged parts get the ball joint tool specified from Freedom Racing Tools. The taper is super tight, a pickle fork can't get in there, hammering on the upright is difficult and off the shelf or HF ball joint tools won't get under the joint. I've done...

For Sale 2018 Mustang GT Intake Manifold. 6500 mile take off. $300 shipped in 48 states.

3681

I asked Steeda, they are worried the ECU strategies aren't compatible. I have also contacted Shaun Perry at AED and Mid Atlantic Performance in VA, so yes I have spoken with reputable tuners. Making an appointment with JDM Engineering near me in NJ, they had done a killer tune for my '16 with...

Looking for a reputable tuner who can write a good road race tune for the Bullitt Intake and TB(Digital 87mm) on my '18 Engine. Has JLT CAI, ARH LTH and 3" cat less Corsa Exhaust. No other internal mods except PAC RPM valve springs. None of the tuners I've worked with want to write it since they...

GT4 cars have to run the spec wing. Don’t know if they tried holes or slots in the end plates. It’s just my take on it, maybe they do like to patent drain holes. I will ask Dean Martin next weekend.

Also here; https://www.corvetteforum.com/forums/autocrossing-and-roadracing/2436952-f1-rear-wing-endplates.html

Formula 1 has been doing it for years. Re: Why the cut outs in rear wing endplates? 0 Quote Post by godlameroso » 13 Aug 2011, 20:53 For the cut outs, mind you the air on the outside of the end plates have a higher than ambient pressure as they curve slightly outward. The cut outs which are...