Sponsored

Search results

  1. Will 0.020 over bore on a gen 2 be ok?

    Thanks for the input:) appreciate.. that makes me feel better at least haha

  2. Will 0.020 over bore on a gen 2 be ok?

    Do you think the cylinder supports will do their job? Did you have success with your blocks at .020? Really don't want it to crack after doing 1 pass haha

  3. Will 0.020 over bore on a gen 2 be ok?

    O yea, .020 :) thanks

  4. Will 0.020 over bore on a gen 2 be ok?

    Have a gen 2 0.20 over bore Has Modular head shop cylinder supports Will be pushing around 900hp Is this a bad idea... or is 0.020 still safe enough with cylinder supports?

  5. Is my timing wrong? P0017 camshaft correlation and misfire. Vct2 6/ -1.6

    All fixed now. It was intact the timing

  6. Is my timing wrong? P0017 camshaft correlation and misfire. Vct2 6/ -1.6

    Same

  7. Is my timing wrong? P0017 camshaft correlation and misfire. Vct2 6/ -1.6

    UPDATE ***** incase anyone has the same problem- it did end up being a timing issue. Retimed it properly and it's running great now:) *******? Just had a newly built engine put in New clutch Did a crank relearn like 8 times, but I'm still getting the following... P0017 crankshaft position...

  8. Is my timing wrong? P0017 camshaft correlation and misfire. Vct2 6/ -1.6

    Was probably grounded right Likely timing I'm hoping..

  9. Is my timing wrong? P0017 camshaft correlation and misfire. Vct2 6/ -1.6

    Ah not 100% no :o That could cause an issue ?

  10. Help p0017 after OPG install

    Did you get this figured out? Was it the timing

  11. Is my timing wrong? P0017 camshaft correlation and misfire. Vct2 6/ -1.6

    Just had a newly built engine put in New clutch Did a crank relearn like 8 times, but I'm still getting the following... P0017 crankshaft position correlation- camshaft position correlation Cylinder 2 misfire Then when I was driving in 6th gear at about 75mph the CEL would flash and I got...

  12. Crank shaft position code after oil pump gear install?

    Yea fully rebuilt engine put in

  13. Crank shaft position code after oil pump gear install?

    P0017 crankshaft position - camshaft position correlation.. and Cylinder 2 misfire.. drives and idles ok until going 70mph in 6th gear... then it starts to bog and run rough Probably timing issue?

  14. Crank shaft position code after oil pump gear install?

    So timing change was off?

  15. Crank shaft position code after oil pump gear install?

    Few year old bump.. Same problem.. wondering if you got this figured out

  16. Pp supercharged owners 3:73 or 331 gear

    Also wondering

  17. What Compression? Odin or 3.0L Whipple?

    Whipple 3.0 Lower compression + more boost to reach 700hp on pump Pulley down + more boost for 850hp on e85 Full send it

  18. What Compression? Odin or 3.0L Whipple?

    There's already few threads about compression ;) worth a read

  19. Built 6r80 vs Built Manual Trans

    Bump. :)

  20. 10:1 compression gen 2

    Through Lund- I'd just empty the tank on weekends or when needed for e85





Top