Search results

I think it’s the same plug I use on my 22. Mine came from a GT500 but I deleted the plug for the rear diff cooler

Get the h pipe it doesn’t change quiet mode that much. All I have is an h pipe on my 2022.

That harness is still on eBay just search gt500 active exhaust harness. The two for the actuators should be PN KR3V - 14B599- DA x2. Sorry I should have taken notes but I was winging it because my car was different. Hope I helped.

Pretty much if you have the plug in the pic inside your trunk. It’s plug and play. All you need is the gt500 harness which is going to have an extra connector for dif cooler. You can delete it and replace the already connected EVAP harness with the one that came with the car because is too...

For any one with 2022 trying to do this. I had the plug in the trunk that I used the wiring harness for a gt500. Removed the wiring for the diff cooler. Everything was plug and play. Make sure you have the fuses, turn on turntable exhaust in IPC with forscan and activate the exhaust with a turn.

I have a 2022 with the plug in the trunk with all the wires and the fuzes. I bought all the harnesses hoping it would be plug n play. Did the forscan and the tune. I have the exhaust options but nothing happens when I switch modes or turn on the car. Anyone know what I'm missing? I don't get...

Help I know I'm 3 years late but after turning on the active exhaust feature with the tune I can't select the modes anymore. I could before I turned the active exhaust on with VCM Editor. although nothing actually happened it wasn't greyed out.

Anyone has the part number for the harness that come from the spear tire area?

I have thought about upgrading my unit also. Out of all the upgrades these seem to be the best since you can retain fords syn 3. Take a look. https://autotecpro.com/product/ford-mustang-15-20-10-4-tesla-px6-navigation-system/?v=e4b09f3f8402

The hole do match, my buddy had the small spoiler and I have a PP1. We’ve both switch spoilers and noticed the holes are the same.

Hello I didn’t no the lower grille caused the sensor not to work. Does anyone know of a modification that can be done on carbon fiber lower grilles? Can it be sanded down thin enough to make the sensor function properly. Thanks!!