Search results

I tried to call Pypes, however their phone was not open at about 5pm EST although they said they are open till 630 EST :headbonk: Regarding the midpipe section; we tried to move one side to the other, and on the left side, the bung points downward so the O2 sensor points down away from the...

Guys, looking for some advice on two issues with my headers install and how to resolve them?? :cheers: beefcake cough cough Installed the pypes headers with the following issues: 1) Steering shaft is rubbing against one of the header pipes. I did not try going in the car and turning the...

interested in a code

do you have a picture of your fix..? I am unclear on what you did for it.. definitely interested!

great start! interested in this myself too

Great!! I can understand it now. I'd like to explore this option as well - how did you go about cutting the piece on the driver side to match the hood?

I am not clear on what you did, could you post a few more photos? :cheers:

Looks great! Did you have to do any prep to the plastic before dipping? Reason being, I have heard that because of it's rough texture, dip and even vinyl is hard to stick to it. Thinking of doing the same!

Great choice! Could you elaborate on it's comfort (I'm a bigger guy) have been considering a Charger.

Broke some panels in the car while installing a stereo a while back, looking for the following (stock and price) Foot Rest Trim FR3Z-6302345-AA Foot Rest Trim FR3Z-6302344-AA Foot Rest Trim - Fuse FR3Z-63023A98-AB Window Switch + Trim FR3Z-14528-BA Window Switch + Trim FR3Z-14527-AB Air...

I had a similar issue where I though it was radial pull, swapped tires and same issue - turned out to be a very fine tuning of the tire pressure across all tires. Verify the cold pressures are within 0.5 PSI (or less) of eachother. I kid you not, when I say this fixed my issue.

Try updating the SCT programmer firmware itself from SCT - I had a few issues with mine throwing various errors and misbehaving until I did this. It just requires the SCT software and your laptop.

faces, yes

Loving it!! Where to order the gauges from?

:headbonk: Today, I took the car out of storage. Had a battery tender over the winter. I noticed that the seat memory buttons would respond to presses and adjust the seat and mirrors accordingly, and then a few minutes later not respond. Without shutting the car off again, after...

Did you remove the calipers to paint them? Did the side of the caliper towards the middle of the car get painted?

Thank you!! Can't wait to see step by step pics :cheers:

subscribed! do you have the link to the part on summit?

SteedaTech For a daily driver GT, what spring rate should I be aiming for? When would you use a lower, vs. higher rate? I currently have Eibachs which are great stiffness that I'd like to mimic in the future.

15134300DCWC 15178300DCWC pricing on the above? (1 3/4 and 1 7/8 direct connect with cat)