Search results

http://www.cjponyparts.com/mustang-parts/p/STW60/ I just placed my order - I was told it was the last unit in stock.

It looks like you can at least get a couple threads started with the nut - I imagine you could run a die through the two bolts and avoid removing/replacing anything all together.

I had a very similar experience. I actually bent the fender sheet metal because the nut will not seat properly. I ordered my Ford Performance hood struts from MAK Performance and left feedback with them on how displeased I was with the product, but never heard a word back from them. Really...

Took the car to the dealer today. One of the bolts holding down the wiper arm came loose causing the clearance issue. A new arm is on order and the paint on the underside of the hood will be fixed.

Yea its bad. Only paint damage appears under the hood so its not visible with the hood closed. I already set up an appt with the dealer. Not thrilled.

I noticed this today - passenger side wiper is making contact with the hood. The pictures below should be pretty self explanatory, not sure if anyone has had similar issues??

While I didn't have an issue with getting both of the front bolts in, I had a similar issue with not being able to fit my torque wrench in the gap between the 7/8" bolt and the gas tank on the driver side. What I did to give more clearance was support the differential with a jack and loosen the...

I have to second this statement. Also installed the black Steeda diff inserts and there is a significant increase in drivetrain noise (no vibration). While it seems the clunk noise when engaging the clutch/shifting gears is present in all manual cars, these bushings will make it much more...

I installed mine this past weekend. If your pedals are similar to the PP, the metal cover can be removed with a torx bit (there is a screw on the back side of the pedal). Very easy to do once you remove the entire pedal assembly, which consists of disconnecting the wiring harness and removing...

Looks great. I already have your vertical links and will be placing an order for the front/rear sways, end links, diff bushings, toe rods, and lockout kit once the CB005 are available for shipment.

Thanks Nick! The rapid turn signal noise was driving me crazy, this is a must do if you install the switchbacks!

Nick, I just emailed your customer support regarding the installation of the universal resistor kit you sell, but they were not able to help. I just received the unit, but need to clarify which wires to tap.

I recently purchased my Mustang GT Premium PP from Koon's Ford in Falls Church. Russell Walker (sales) and Larry Mills (GM) really took care of me and I got an incredible deal. I was adamant about no front plates and no prep wash - both instructions were followed. Couldn't really ask for...

Nanashii - PM sent (I'm local to Arlington, Va), lets arrange a deal!

PM sent

PM sent