Search results

Time to treat myself for christmas Can I have a code please. Thank you

https://www.mustang6g.com/forums/showthread.php?t=98975

Why deviate from what we have already learned?Just follow us. We have made all the mistakes and wasted the time to make it work properly. Am I missing something?

Pin 1 is 6 volt. You need a Pac TR-4 to convert it to 12 volt. The 12 volt and ground to power the Pac TR-4 are also in the same plug. Amp will then turn on and off like factory.

That's Nicky the owner of American Racing Headers

In the helix software you only need 2.You just drag and drop the inputs to the outputs. Other DSP's may work the same way,but I am not sure on that.Send back the JL amp and just put the HelixP-Six in and be done with it.All in one unit.The JL @ 75watt a channel is borderline enough power.It will...

You are only going to use 4 channels for input.In the software ,you can tie any input to any output.I use only the front channels to drive all 6 front component speakers.The rear channels I have to the sub output.So yes,4 in up to 10 outs.You can download the Helix software and use it in demo...

https://www.ebay.com/itm/HELIX-DSP-PRO-MK2-IN-CAR-DIGITAL-PROCESSOR-HIGH-END-BRAND-NEW-2017-WARRANY/262935632769?epid=12008869711&hash=item3d382f5b81:g:3ZoAAOSwnF9Y74dl This is the 10 channel version This is why I ran the Helix P-six .It has plenty of power for the 3 way front stage,and 2...

Update Time! Now that the subwoofer project is finished,this is the last piece of the puzzle. I have set the gain on the sub amp to blend with the front stage.But there are times on some songs when it needs either a tad more or less bass. TADA! Here comes the URC.3 from audiotec.It has 2 gain...

Not enough power.Just an opinion.

I don't know, no experience with them.I do run a HCP 1DK hertz amp for my subwoofer setup.This is my first go around with electronics from them,before that it was just speakers.

I would go with the Helix...

Thanks for the credit. You could use the both door wires for the woofer and mid,then just run a new wire to the pillar for the tweets.Saves a lot of grief. You are going to have to bridge the channels together and feed each crossover the full 200 watts at 87 db. Not a big deal.Use the 16 gauge...

Kratch,before you mount those speakers,did you look at the specs? They have a 87db rating which means it will take some power to get loud. Speakers with a rating on 90-92 db will take less power to get to listening levels.Just thought you should be aware of that. Next is the crossovers.How are...

https://www.mustang6g.com/forums/showthread.php?t=97876

Here is a good combo. https://www.abt.com/product/76229/Hertz-12-Hi-Energy-HX-Series-Single-Coil-Mobile-Subwoofer-HX3005.html That's almost 1/2 off retail To drive it. https://www.amazon.com/Hertz-Hcp-1Dk-D-Class-Amplifier/dp/B00UCDFV8Q I like the hertz amp as it is clean power and has nice...

$1400 minus the $700 he is about to spend is $700.What is going to happen is he will get it installed and running and say,"It sounds good,but it's missing something". "I just can not seem to get it tuned correctly" The time alignment and having a EQ are very important when running an active...

Hertz mille legend or mille pro series.Kick in a few extra bux and get the Helix P-Six.It will give you time alignment and EQ adjustments that are very important.Focals are nice and sweet in the midrange,but the tweets can be a touch rough.The Hertz are smooth at any volume with good clean...

Ford racing

Eric,of course it is the whole system :D I already pulled a bunch out at 80hz and 100hz to get where it is. The sub xover is set at 75hz with a 24db slope and the midbass at 85hz with a 12db slope.The 10hz gap helped knock down the 80hz hump. I think the hole at 60hz must be the car,as it is...