Search results

Does it clear the front caliper?

I have a Laguna seca 12-13 boss wheel does anyone know if it fits or can be used front or rear?

Can you scan codes on other vehicles even though it's locked to one?

Would it be good if it was, I see people talk about the rear mains leaking. Thanks

Me and my wife are looking at a couple of 2002 to 2005 boxers, we were looking at it as a second fun/project car, anyone know anything about these? Thanks

Question Would it be better to get the flex fuel tune over the reg 93 Octane tune because it allows the Pcm to better tune for the fuel. I only plan on running 93. Thanks

Use the mykey setting next time has limits on speed and such, don't know about rpm

Just put them on my non pp 20 inch wheel car this weekend, had sways on my last 3 mustangs and for whatever reason made a big difference on this one, rides better to.

2012 Boss 302 2006 Mustang Gt

Any info on the GR3Z17626AA California special splitter, and avail Thanks

[ Sct canned tune? QUOTE=Arless 5.0;1196047]I've just bought a 2016 Mustang GT with the pony package, and 6-speed automatic and the 3.55 rear sets. So far I added a SCT tune and an Airaid CAI. With the 19" all season tires the best 0-30 is a slow 2.2 seconds and a 4.5 seconds 0-60 60ft...

There just looking at the flash counts, these cars are pretty reliable anyway

Did you have a 170 stat

So the dealer has to install this or do you get a flash tool with it?

Its great quality just a tight fit.

If you go to summit or jegs they have that cover, the ford oil cap has been the same for years

I really like the design, the o ring and the filter will work great, wasn't a fan Of those steel wool designs, the engine cover looked like it sat on the Cam wire the whole time it just needs about a 1/4 taken off

I give this a 5 out of 10 the fit is bad a lot of the intake lines Rub also the cam wire gets relocated on the separator via It's clip and the engine cover sandwhichs it so I took a file And clearance it and the vaccuun line at the top, also look In the pic the coolant line sits on the separator