i had the vibration when i had my stock rear in the car, i reclocked the driveshaft a couple times on the diff side and it went away.
i recently replaced my 3.73 pumpkin with a 3.31 pumpkin and have tried multiple positions and no matter what it still vibrates. im pretty close to just putting...
well, im doing a second set for a friend. this set is the 4 piston fronts. the only real difference between the two is you need to separate the halves of the 4 piston calipers to remove a very small rubber gasket.
remember, the front calipers only need about 30psi of air pressure. the rears need...
really sucks but im a firm believer in "better safe then sorry" thus why i did timing gear and OPG before the blower went on.
id rather KNOW im not going to have an issue rather then THINK im not going to have one.
honestly yours seems shorter then what i was expecting. does anyone have any input on the base kit with the 380c pump and 5gal tank on run times and noise?
they use the reserve tank to go up/down. once it hits a curtain psi in the tank it will kick the compressor back on till the tank is filled. depending on the pump setup it can take a minute to several minutes to fill back up.
this is why i asked for the videos, to get real world results. like...
perfect, exactly what i was looking for. did you every have the 380c that the kits come with? if so how would you compare it to the 400c you have? seems that 400c you have fills the tank quite quickly so the noise really isn't that bad considering it was only running for like 45seconds and it...
its definitely NOT the deciding factor of what i do, i just want real world input. not someone trying to sell me something.
if you can get some vids that would be great. the only ones i can find have music overlaid and you cant hear anything or its just still shots of a car aired out.
ive...
Anyone have an non edited videos of the cars? I want real world vids of how loud the system is outside and inside of the car. I'm trying to decide if I really want to go this route or not. I'm about to purchase a kit and just want to make sure.
I'm curious how loud the compressor is, how...
Doesn't require any at all. Bolts right in.
The only modifications are to the coolant hoses. If you ever went back to stock those would be all you would need to purchase.
seeing if any used kits are availabe before i just purchase new.
would like
v2 digital
3/8" line
smaller tanks to mount in the spare tire location
these are NOT must's. if you have a digital kit with 1/4" line or the single long tank that is fine aswel.
looking to purchase asap.
i have one but it has the holes drilled for the plate with plugs. if you change your mind about that let me know. it also has 3m pro clear bra already installed.