Search results

One of my Steeda proaction adjustable front struts will not adjust. I’ve put a good amount of force trying to turn it and it will not budge in either direction (CW or CCW). Strut on the other side adjusts easily. Anyone else ever run into this issue or know a way to possibly fix it?

About to install some Steeda caster/camber plates. I’m a noob and never installed c/c plates before so forgive my ignorance, but what are these extra plates for (circled in red). All of the installs I’ve seen only use one of these plates placed between the top of the plate and retaining bolts...

I recently got a couple of runs in at the local strip, but only able to log 1 run: https://datazap.me/u/codereddew12/drag-run-1?log=0&data=1-10-18-38 Weather was ~45°F at sea level. I left ~1500 RPM and felt the car slide a little on 2-3 shift, hence why I let off the peddle around that...

I lost the nut that goes on this bolt (clamp on the extension/down pipe joint). Does anyone know what size nut is needed?

Does anyone get a clunk/thud when cruising at highway speeds, letting off throttle and then getting back on the throttle? Feels like a clunk coming from the diff area? But not entirely sure. Will check for any loose parts in the driveline but just wanted to see if anyone else had these issues...

Friend of mine says he’s trapping 119-120 in the 1/4 mile on a STOCK 2020 GT with a 10r80, full weight and premium model too. Is this accurate or is he blowing gas

Thinking about grabbing a set of rear 17x10’s VMS wheels with 305/45/17 MT Street Rs — any special things i need to do when I get them mounted? Do y’all recommend using brake cleaner on the beads before mounting and/or using hi-tac on the beads? Also, do they need to be balance? My car is...

I’m heading to the drag strip this weekend with my 2020 base A10 w/ 301a package, Lund tuned on E85 with Michelin PS4S 285/35/19s on the back. This will be my first time taking this car to the strip and I’ve only had minimal experience at the track several years ago with an older 2002 mustang...

So I have a 2020 Mustang GT. Attempted to install BMR’s CB762 and CB010 kits yesterday and was able to get everything bolted up EXCEPT the 4 front cradle plate bolts highlighted in green in the attached pic. I spent nearly 5 hours struggling in my garage and must’ve pry’d, unbolted and...

Error

So I'm looking to upgrade my suspension, but will have to do it slowly over time. I have tried to spend my due diligence researching this topic but there's just so much information out there (with varying opinions), it's a little overwhelming honestly lol. But from what I've gathered, I should...

So I just ordered a GT500 front bumper conversion kit for my race red 2020 mustang GT and I cannot decide on whether I should order the cervini stalker hood vs GT500 hood? I’m leaning towards GT500 hood Bc I think it’ll flow better but I’ve always loved the cervini stalker hood. Can y’all post...