Search results

Yes Earl, they are three pieces each side. Each section are made from 6" wide x 1/4" thick aluminum pieces. He welded three of them together to give me the 18" width I wanted. On the underside he welded supports as you can see in the photo below. You can also see the three sections that I...

Thanks Jaime. The approach angle was ok on both. It was the fact that when you lift up the car, the wheels would move in a bit and bring the ramp in then when the car goes back down, it would push out the ramp. Not a huge deal but it bothered me and the ramps are on top of the carpet part of...

Here we are 8 months later and I finally got the custom aluminum ramps I was having a friend build for me. Covid was not the issue. He put it on the back burner since I told him I was in no hurry. A few months went by and I called to see how it was going and he completely forgot about it. 😊...

I should have posted the link for the trunk pop up kit from Steeda. This is the one you want for the large wing you have on your trunk lid: https://www.steeda.com/steeda-555-0697-s550-trunk-pop-kit#/filter:ss_ymm:Mustang$253E2020 Below is the strap I attached to the underside of the trunk to...

Hey Tim, great video as always but wanted to let you know what I have done so I don't have to handle any part of the trunk lid. I installed the Steeda trunk pop up kit which basically are just a couple of higher pressure struts for the trunk lid. The lid opens up completely so you don't have...

Terrance is working out the logistics on this buy and will get back to all of us here as soon as he does. #187 I talked to him yesterday and he said with the holidays, things have been taking longer than he expected.

Like Tob said, there is plenty of clearance and it does not affect the mechanical movement. When Kevin was creating this "shifter crown" as he calls it, he designed in a little extra clearance for people like myself, Eric and others that have the top of our consoles covered in Alcantara. Kevin...

You know Tom, I thought about that when I had those radio dials off when I was messing around installing the Tesla styled Phoenix radio system in my car. However I decided just changing the DTC dial would give the interior a special appearance. If the other dials matched it, the DTC dial would...

Ha, we are on the same page. The day Terrance announced this product I told him I wanted to paint it black. I have no CF bits and pieces anywhere on my 500 and not going to start now. As a side note, I actually am not a fan of the way any carbon fiber looks anyway. Terrance told me the Matte...

I do have one from the prototype phase but it is glossy plastic and just that, a prototype. It was the first one Kevin made and after test fitting it, he needed to make a few adjustments. I would have to say, Kevin got it right because the finished product fits like a glove. Below was the...

Mine came in today. Tob took some great HQ photos and since it is dark now, thought I would take one with just the interior lighting on.

Have changed the oil three times. 12 quarts each time and it is right where it should be on the dip stick.

I started this thread and you received yours first? Unfair I tell ya, unfair. All kidding aside, I hope everyone loves this little mod. It has been a long time coming and a lot of work believed it or not but Kevin pulled through and is awesome to work with. I guess me living on the west...

No but removing the top section of that console takes less than 2 minutes. You don't have to remove it anyway. Just have to pull it up and move it back a bit to remove that trim plate that is between the USB port and 12 volt port to get to the screws behind it.

Hey Tom, sorry not on the forum all that much lately. You have to remove the top section of the console so you can get to the lower screws on the display trim. You also have to remove the right side dash trim to get to the upper screws of the display trim. Check page 4824 in the service...

Mine shipped also. 😊

I did the same with my car on Earl's suggestion and got my car within a couple of days.

Tom, the Naviks interface box allows the video from the camera to be displayed on the Sync 3 screen. It comes with the necessary adapter plugs/wiring to connect to the back of the Sync system. I cannot remember if you remove the display or the box below the display to connect the plugs...

It will be tight if you use a 21mm socket several times on the lug nuts as it will distort the aluminum cap over the nuts. However, using a good 13/16" socket on the new lugs, you should have no problem.

13/16" socket is the proper size although a 21mm socket will work. It's just slightly larger.