I've put two sets from Redline on a 2015, a set on a 2017, and a set on my 2023. Never an issue with any of those four sets. On my 2015 I was also running a heavier TruFiber fiberglass hood and the struts held without issue. At about 7 years old the original set on my 2015 got to where I would...
I have the AWE Touring. It's deep, and don't let the "Touring" label fool you. It's loud for a "touring" system, yet almost disappears at cruise. On my 2015, I had the Ford Racing Sport by Borla, and there is no comparison between the two when it comes to the deep tone.
Visited Oceanside about 3 weeks ago. Made a few trips down to San Diego, and a trip up north to Irvine. Loved the weather and the scenery. Everything else I could do without!
Unfortunately, I didn't record the process and don't have a spare lid to do a video on. Here are the basic steps I took, though:
Using a small drill bit, and being careful not to drill too far so you don't drill through the lid, drill out the plastic mounting tabs that holds the grill in...
I believe this to be specific to certain (i.e. newer) model years. My 2015 never did this; however, my 2023 I have heard the pump priming for no apparent reason. I don't recall if I had my fob in my pocket, and there is a good chance it was on the battery tender. My 2015 stayed on the same...
You're welcome!
I experienced this very issue after my shifter install and I was trying to find a way to keep the trigger from rattling. The smallest of rubber bands or slightly too much felt around the pivot point created too much friction and wouldn't allow the trigger to release enough to...
Here's what I like to use. Bought the second light and they are bright! You can set the light to low, medium, and high. You can slide the lights along the bar to where you want them, and the lights swivel and tilt...
Congrats on the new car! Looks good! I've always been partial to black as well, and nothing looks better when it's clean. Decided to switch it up this time around but black is hard to beat!
Very easy.
Cliff notes version:
Pop the trim ring and bezel out.
Remove two screws that hold factory handle in place.
Remove boot from factory handle.
Attach boot to aftermarket shifter handle using supplied zip tie.
Attach aftermarket shifter handle with two screws provided.
Snap bezel and...
Fair enough on the Mother Mopar thing, but I like the look and feel better than what Ford gives us from factory.
I don't wear a ring on my right hand so no issue there. I will say my wife drove the 2017 with the Hurst for a while before the car became our daughter's and there was no issue...
I've never been a fan of the shifter handle in the automatics. I have previously installed a Hurst handle in my daughter's 2017 Mustang. For my new car, I wanted a different handle as I didn't want the chrome looking center section of the Hurst. I came across the UPR shifter, and having an...
Make sure the trigger mechanism on the shift knob that you installed is completely releasing when you place the vehicle in park. You can put the car in park, and it actually go into the gear, but the internals of the trigger mechanism resting ever so slightly on the top of the actual shift...
They are high on my list when I get ready to upgrade.
How long did it take to get your order from them, and how has their service been so far?
Any issues or complaints regarding workmanship on the new wheel?