Search results

Removed from the vehicle when I swapped to auto. Part number is FR3A-12B684-DRA. $200 includes shipping

No issues. Includes the original box, instructions, gasket and bolts. $180 includes shipping

Is this a relatively "safe" area to be with turbos if there is enough fuel? I know there is risk in everything, but are majority of cars living at this level?

Was at a low speed and punch it, car spun, revved up and went into limp mode. Any recommendations on next steps? Remove motor, diagnose level of damage? Is this preventable? Are aftermarket oil pump gear, CS gear and ATI balancer under any type of warranty?

Looking for a different wheel setup that'll fit my PP car. 1. Looking to run a 18 or 19 in the front, not a skinny 2. Looking for a 17 in the rear or possibly a 15 if I do the brake kit I only really see Racestars, Welds and the Forgestar F14. Is there anything else you guys can think of?

Now that the 6r80 swap is complete and I'm nearing the end of tune revisions I've found that low speed punches are now... a problem. As soon as the converter flashes the car is getting sideways. Am currently running 305/35/19 MT ET Street SS. Would there be any real gains in traction by...

Completed the 6r80 swap and got the trans temp enabled on my cluster. Cruising around tonight, no WOT, the trans temp was floating around 205. I don't really have a baseline, is that normal? It was about 90 degrees and humid. Also, am noticing some heat coming out from the side of the...

Looks like a couple different options on online sites, though none call out performance pack and I'm not sure which I need. I see premium, non premium and high series. My car is a 401a, so I guess it could be considered premium and also high series. Edit: nevermind, found in a different...

Haven't had the green belt on too long and it's already make a bit of noise during cold starts. I saw that Gates also carries these RPM belts in many different sizes. Has anyone tried one yet? Thoughts? Browsing various vette and hellcat forums, I see positive threads so far...

I'm in the process of swapping from manual to auto. I'd like to have the OEM option of remote start, but am unsure where that hardware resides. I know that i'll have to find a keyfob for an automatic for starts and of course will be installing an auto PCM, but unsure if it's something else I...

Swapping to a 6r80 and will be going to a different gear, rather my 3.73. The car has a Vortech v3 on E85 with a Circle D 4C. Would you guys recommend 3.15, 3.31 or 3.55? Mostly just a nice day street cruiser with occasional track duty.

Anyone?

sold

Looking for the entire 3.31 differential and a 6r80 from a Mustang 5.0.

I threw a Hurst pistol grip on my Magnum XL with a MGW shifter and like it, but it rattles at high rpm when on the throttle. I've tried multiple fixes, but nothing works. Any other ideas? - Tried teflon using the MGW jam nut - Tried teflon using the Hurst jam nut - Tried locktite using...

I need to find a nice secluded place to practice the line lock setting. Went through the water box and tried, but it failed and gave an error. I then tried manual burn outs and the car died on 3 attempts. Said screw it and ran on cold, new, slicks. What kind of potential do you see if I...

Are you still running the base one that came with the kit? Currently at 11PSI and will probably just to 13. I have the race BOV, but it's too loud for my taste. Is there any harm in using the base bypass valve at 11/13PSI? I currently don't have any driveability issues at 11PSI, but am...

Went with a wastegate setup and cleaning out the garage. Looking for $70 shipped! Cheapest horsepower you'll buy :) Edit: sold

Have a buddy installing a Fore system. He can't mount where I mounted mine with a centri. Can you please share a picture with your mount location?

Installing the torque booster and am wondering how far I need to move the new pulley over? It's a 3.33 Thanks!