I cant make my mind up on which tire to get? Tire size will be 275/35/20 and I am looking for the better dry weather handling. I never drive the car in the rain . I have had the Sumitomo before and it was a good tire but after reading about the Firestone I might spend the extra money for them...
Before they go crazy taking apart the engine there is a problem with the intake manifold runner control breaking in the #8 cylinder causing misfire codes. Does your car run good with just an engine light?
I didn't need bolts for my install but the minimum drop springs lowered my car about an inch, more than the .75 inch drop it suggests. Looks good and rides like stock.
Ford has a message for this concern.
SSM 45895 - 2015-2016 Mustang Built On Or Before 4/22/2016 - Rear Tail Lamp, Turn Lamp Or Stop Lamp Partial Outage - DTCs B1271, B1272, B1273, B1274, B1275 or B1276.
Some 2015 and 2016 Mustang vehicles built on or before 4/22/2016 may exhibit a partial...
Here is the post on the internal message boards. I removed the dealer and tech info though.
Discussion BoardsParts & Service Discussion BoardTech-to-Tech2016 MUSTANG 5.0 P0300,P0308 FIX
Send an email to webmaster
View Most Recent Message Refresh Open Discussion Boards in a New...
Stupid question but how will a 285/35/19 on a 19x10 inch rear wheel look with 19x9 front wheel with 255/40/19. Tire diameter is 27.1 for the front and 26.9 for most manufacturers. I don't know if the slight difference will be noticeable?
There is a ford message for this problem.
SSM 45895 - 2015-2016 Mustang Built On Or Before 4/22/2016 - Rear Tail Lamp, Turn Lamp Or Stop Lamp Partial Outage - DTCs B1271, B1272, B1273, B1274, B1275 or B1276.
Some 2015 and 2016 Mustang vehicles built on or before 4/22/2016 may exhibit a partial...
Voltage will vary from about 11.9-14.8 because these cars have a pcm controlled alternator. It will only charge when necessary to help with battery/alternator life and fuel economy.
After many years in the business and seeing the same problem take an air hammer with a very dull bit and use it on the inner half of cv joint. It will pop out pretty easily.