Search results

If anyone can help me as to which photo sharing site I can use to upload photos using a URL code? I'm not paying for Photobucket's 3rd party sharing capabilities. Any help is appreciated!

http://LDuJM5efIf anyone can let me know of a site that I can use to upload my photos and use the URL? It would be greatly appreciated. SR Performance Lowering Springs & Koni Struts. They were used for about 800-1,000 miles, replaced with coilovers. Minor scuffs on the springs, still in...

Just had Ridetech coilovers installed, I noticed a small squeak while going over some bumps, like freeway entrances, and bridge connectors, is that normal? Is there a settling period like there is with springs? I would also need some info on what the rebound and other settings should be at...

Selling stock springs, struts, sway bars, and end links. I believe all necessary parts are there. This is for the (base) model. $150 obo, local pick up, San Diego (Santee).

Had it installed on my '17 for about 800-1k miles, paired with Roush axle back, I went back to the resonator because it was extremely loud. $100 local pick up, San Diego (Santee)

I'm thinking about buying the V1s, I have a base 2017, would I need to buy the Ford Performance Strut Mounts? I notice the V1s don't come with camber plates. If so, do I just place the strut mounts in top of the coilovers? Or is there another piece I have to buy? Is it recommended that I...

Only minor mods, Roush axle back, and resonator delete H-Pipe, putting the resonator back in because it's too loud without it. Taking it to the dealer on Friday, not sure why I already have a check engine light going off after 4,300 miles?! Putting the resonator back in on Thursday, in case...

I was curious if the Cobra Jet CAI will pass smog? I don't want to install the Cobra Jet intake manifold if the CAI isn't going to pass CA smog. Any info is appreciated.

Probably a stupid question, but if I'm going for a Lund tune, I have to buy a tuner first? Such as a SCT tuner? Any help is appreciated.

I'm pretty sure I'm set on getting the Cobra Jet intake manifold, are there any negative issues with also adding the 42lb or 47lb injectors? Is it worth adding either the 42 or 47? Or just keep the stock injectors? Any info is greatly appreciated!

I know this topic is personal preference, but I'd like to get some feedback on personal experience from some members. I'm debating on supercharging my 2017 Mustang GT, if I don't SC, I'm going to upgrade with CobraJet manifold and either Lund tune or Livernois tune, I'll upgrade half shafts...

Just a forewarning, if you purchase the BMR Sway bars, the front sway bar brackets come with Allen screws, unless there is an easier way to install the driver side bracket that I don't know about, had to cut a 10mm allen wrench down to about 3/4 of an inch, and used a box end ratchet to tighten...

Just installed the Vogtland springs, and the kit didn't come with the little bump stops, is it a big deal that I used the originals? I noticed that if I go over a speed bump, sometimes it feels like it bottoms out on the passenger side. I'm not going over the bumps fast, just sometimes on the...

I would like to run 255 45 on the rear, and stick with 235 50 on the front. Will 255 45 fit the 8" wheel with no issues? What's a good brand/series for both sizes listed? Any help is appreciated. Thanks