Sponsored

Search results

  1. New Turbo Setup, Codes Codes and more Codes

    Hello Gentlemen, I do greatly appreciate all your replies. In a nutshell, and after doing a bit of research, it really could be "ANYTHING" Using the magic of Google and YouTube, just one of the codes (PO 300) leads me to believe it could be anything from a bad spark plug all the way to a...
  2. New Turbo Setup, Codes Codes and more Codes

    The shop replaced the plugs, NKG's I recall - I'm sure they're gapped to what Hellion recommends. This "Crank Relearn", you and Plimmer have both suggested this - where do I access it in the SCTX4? Is the process outlined in the manual? There wouldn't be any harm doing this is there?
  3. New Turbo Setup, Codes Codes and more Codes

    Just trying to figure this S#IT OUT damnation. Thanks Guys. :rockon: :flag:
  4. New Turbo Setup, Codes Codes and more Codes

    USGiorgi, and the rest of You - These are all very good suggestions - THANK YOU. Having one of the turbo's take a crap crossed my mind as well, that's something that typically happens in the first 200 miles of use or so. Fortunately if that's the case, I know the company (Precision Turbo) will...
  5. New Turbo Setup, Codes Codes and more Codes

    Well, I did find an oil leak coming from the drivers side Turbo lines today I didn't notice Thursday. Not sure if that would cause all the codes and for the car to go into Limp/Safety Mode.
  6. New Turbo Setup, Codes Codes and more Codes

    Well, not not me, but I'm sure the shop did. It ran great for 2 weeks and this just happened all of sudden. I will take a look around and see if anything has come unplugged. Checked all the fuses, they seem OK.
  7. New Hellion Set Up - Car in limp mode and codes

    Hi All, I just posted this in Issues, Repairs, Warranty, TSB, Recalls, but wanted to link it here also. Please Help if you Can. Thanks. https://www.mustang6g.com/forums/threads/new-turbo-setup-codes-codes-and-more-codes.146485/ -BulliTT69-
  8. New Turbo Setup, Codes Codes and more Codes

    Hi all, just wanted to throw this out there for anyone who is more knowledgeable than I - my experience dates back to the days of carburetors and points/ignitions so I really have no clue. My 2019 Mustang Bullitt just got the Hellion TT treatment, sleeper kit. It has the Hellion 4-1 headers...
  9. Is it common to have 0 revisions after an email base file?

    Well, something's going on with my Tune, I have a complete Twin Turbo Set up from Hellion tuned by Lund. I think it's common for Superchargers / TurboCharger set ups to maybe get a revision here or there, even if it's minute data. I've seen guys here with up to 5 revisions in some cases. I'm...
  10. HELLION TT 2018 GT DYNO--- 1194 RWHP!!!

    I actually suggested this route to my shop, i.e. what Hellion has done - but since it has no real world experience I doubt any reputable shops would suggest this path, at least currently. I would REALLY like to hear if anyone else has gone this route, and if they care or not if the motor...
  11. Whose made 700+whp on pump?

    80Fox, I just got your Joke LOL..... (Duhhh) Sounds good, will do!
  12. Whose made 700+whp on pump?

    I just had my car on the dyno today - made 717 hp / 588 tq on straight 93 through the factory exhaust on 7.6 lbs of boost. 2019 Bullitt, Hellion Sleeper, Hellion Headers, precision 62 jb turbos, stock fuel system with a BAP and 1050 injectors. Definitely room for more, will need to replace the...
  13. Blower wait times for delivery?

    Hellion Kit for me, ordered mid April arrived mid May, so 4 weeks. Not too bad considering the supply chain issues currently. I figured the "2 week" turnaround they normally claim might be affected, and well - it was Spring! Wish you the best of luck! :clock::surprised:
  14. How to remove (increase) the speed limiter?

    Awesome dude! :rockon: I didn't see to much of the air turbulence you speak of, but when I straightened mine out it was late at night with no breeze. The cars today are leaps ahead of the older mustangs from the 70's/80's/90's, and stay true up to their top speeds. (over 110 in my FoxBody...
  15. How to remove (increase) the speed limiter?

    I've had mine ripped out, I couldn't get it past 158 as I recall, but that was trying in 5'th gear I remember. A very long, straight stretch (not around here) - and car was very solid and smooth... Very impressed, imagine it will go a little faster with the twins installed. :sunglasses: 1/2...
  16. Seeking Octane Advice

    :crackup:
  17. Turbo Owners Running Cats - Which Brand Holds Up?

    Cookie, Hellion sells High Flow Cats as an option to their set ups, so I've ordered through them, hopefully they stand up to the abuse of 93 - yes E85 is probably the better option (Hear it smells good tooo), but I would like to take the car on trips later this summer so 93 / Octane Booster...
  18. Disappointing Whipple Experience

    It has to be frustrating to get the run around like that. :explode: I hope you get this all sorted out, keep trying. I believe a polite phone call daily just to see where they are with your request can't hurt. :captain:
  19. Two Weeks at Shop, how long did you wait for your for a Power Adder Install?

    Hey, thanks Jordanfmeyer, Qu8Storm. I needed to hear this from you dudes, I really think everyone's backed up cuz of the shit going down. We're supposed to be in the green in some parts of the country, but I'm just not seeing it. Folks are really backed up, and it's not just because of Covid...
  20. Two Weeks at Shop, how long did you wait for your for a Power Adder Install?

    LOL, maybe... My guy isn't a big fan of Social Media though. He supposedly hates it. Honestly though, just a <tiny bit> frustrated, I knew this was going to take some time, but at the same time - I hope he's not taking advantage of my laid back, good nature.... :inlove: I'm really just...





Top