Search results

Had 3.73 on my car and swapped out for 3.31, i spun in 1st and 2nd with 3.73. Boost is always better with longer gears, the more time in gear the more time in boost. now i have a t-56 with the 3.31 and only shift from 2nd to 3rd haha still spin in 1st. also depends what power your gonna make...

BBE Gen 3 here and lund said the NGK 6510 gapped at .20 are good for my setup. TT, E85, running up to 18psi.

Yah that’s what Lund said, around 17 psi on last pull. E85

yah thats my plan, just gotta figure out the settings on my boost controller

its a built gen 3 short block from RPG, pull was made in 4th gear. but yah made all the power up to 5500 haha

oh I see what you mean, yah It was set up previously by the shop where I dynoed it at. I gotta see how to reset the duty cycle and adjust the controller. I got a GFB II controller

Yes sir! Lund said my cycle duty is off haha gotta fix the cycle duty on my boost controller. Gotta look online on how to do it

Yes has the bead roll and used t-bar clamps at the end. But looking to buy a new charge pipe

yes correct, 3rd pull was on 14lbs (thats what the boost controller is set too) and the 4th pull I brought it back down to 12lbs since the charge pipe was well secured. But by the looks of it, the boost controller maybe didn't work? maybe it over boosted, it might be the solenoid i have to...

no the first pull ws on 12 lbs and the 2nd on 14lbs, charge pipe blew off on second pull so we got the charge pipe back on with better clamps and went back to 14lbs. on the last pull we went back down to 12lbs, not sure why it made similar power to 14lbs

yah the boost controller reads the boost level and i have it set to 10,12, and 14 pounds right now. not sure if its going to overbost or something but that last pull on 12lbs, the charge pipe stayed on. maybe the solenoid on the boost controller is messed up? boost leak?

well guys went to the dyno today and it was disappointment hahaa first pull was on 12lbs revved out to 65K. second pull was on 14lbs but charge pipe blew off around 55k. put better clamps but same issue on 3rd pull. went back to 12lbs on the last pull but it my have over boosted? Not sure...

I got the same kit and installed cutouts yesterday, hopefully dyno next friday. 843 wheel is good power on 12lbs

yah boost by gear would be good, 3rd gear would get all the boost hahaa

yah being able to pick boost is helpful and fun. i got the gfroce II but i am looking to get the eboost controller so i can do boost by gear. I run 10lbs right now but have it set it 10 12 14 lbs.

I plan on going to the dyno next friday and doing quick logs with lund. im at 14lbs now so adding the extra 4 won't take long. Just making sure everything on my end is good so I don't false knock

damn less than 12lbs and 900?! must be nice. yah hopefully i get 1000 minimum

yah exactly haha was tempting to sleeve but didn't wanna wait the additional time, was planning on taking it last december again to the redlist so it wouldn't have been ready by then. I am running E85 only, anything over 650 wheel I wouldn't run pump gas.

That’s what I got. Plus the billet OPGs and all ARP studs

Yah hopefully i can get 1000 wheel haha even though its not what ill be running daily. Yes track but did horrible :D my first time was last year on 700 wheel, wanted to get the feel for the track rather a good time, 60ft was poop. block isn't sleeved (would have taken 3-4 more weeks) but RPG...