2020 analog dash install in my 2016. Help

[zigger21]

Need some help. I changed my 2016 dash to a 2020 dash and programming went good, everything works except for my PRNDS selector in center lcd on the cluster does not light up plus my gear won’t show when using the paddle shifters. Any help would be greatly appreciated. Thanks. Any as built data from someone who has done this for an auto would be greatly appreciated.

Sponsored

 

[JWS]

Tried swapping GT350 Analog Cluster into my 2015 Auto.

Swapped the PRNDS. Overlay.

Didn't Light Up.

Circuit Board for the 350 Cluster does not have LEDs Soldered to the Pads.

Even if they were there, no guarantee you could get them to work thru Forscan.

Did get the Digital Speed to Work in the Center Part of the Display, but Programming messed up other systems. Later Analog Clusters made the Digital Speed Standard.

Was going to have a work friend who did surface mount repair install some LEDs on the Pads, but by then the Digital Dash Swaps were Available and I Upgraded the cluster and the console Display to Sync 3.

Everything is now much nicer and convenient. Can see the Speed and Cluster Indicators much easier. More Comfortable on a Long Trip.

Don't know if they kept the LEDs off the Circuit Boards of the Manual Cars on the Analog Clusters.

My Original Analog Board Did have the LEDs and Displayed the Transmission Indicators properly.

I went thru Sam at:

https://oemplusupgrades.com

If you have any questions you should try contacting him.