What did you do to your S550 Mustang today?!

[Izlude]

Fixed a problem where the dash, AC, windows, radio stopped working on startup. Good old disconnect battery and wait 30 minutes. In 95 degree heat in Las Vegas a vehicle without AC and could not even roll down the windows is a disaster.

Sponsored

 

[DonnieO]

Very nice!

Thanks. I need a couple more!

 

[NGOT8R]

Thanks. I need a couple more!

I hear you. What will all of the machinery be used for (work, hobby or both )?

 

[DonnieO]

I hear you. What will all of the machinery be used for (work, hobby or both )?

I do work for aerospace/DoD

 

[Craig Brown]

I don't have anything that nice, I am just happy to have a tool room lathe and a small milling machine. No DRC but they get the job done. I am retired so I don't have the need for the quality tools like yours. I do have great appreciation for such equipment.

 

[DonnieO]

I don't have anything that nice, I am just happy to have a tool room lathe and a small milling machine. No DRC but they get the job done. I am retired so I don't have the need for the quality tools like yours. I do have great appreciation for such equipment.

Those 2 are still standard in a machine shop. I do have a mill and lathe as well. They come in handy.

 

[Stage_3]

Not today, but yesterday.
Drove it.

 

[Roy_Steeda]

Nothing like a peaceful drive

 

[delz05]

Had it it paint corrected, striped and ceramic'd... took about ten days for it be completed. Added "Powered by Ford" emblems underneath the 5.0

 

[Craig Brown]

Painted the coil overs and my modified engine covers today I still have to do the Powered by Ford letters and the stripes in red. I am going to repurpose the 5.0 badge from the 2015 engine cover and mount that on the plastic radiator cover, just behind the hood latch. I have it shining like a new nickel and still need to paint the 5.0 red

 

[Craig Brown]

Anyone interested in engine cover for 2018 5.0 manifold? If you put a 2018 intake manifold on your 2015 - 2017 Mustang and would like an engine cover that fits your car, this is it. It comes with the oil filler extinction tube. One of a kind. Because this one was custom built just for the change over to a 2018 manifold. The 2015 filler tube or cap have different threads than on the 2018. this is my 2015 GT with the 2018 engine cover and the oil filler tube. I came up with a new style cover due to another mod I made, the 2018 cover no longer works. I made a purge valve mounting bracket and it won't fit under the 2018 engine cover. Option 2, before paint, see pics.

 

[MFB]

remove sound tube

 

[MyStang]

Today we pull the covers off!

 

[ihasnostang]

hauled a bag of r23 insulation. it would not go in thru the trunk . 5/10 recommend

 

[The Spider House]

hauled a bag of r23 insulation. it would not go in thru the trunk . 5/10 recommend

See, they are practical after all!

Sponsored