abs lights after wheel bearing install

[sculptor310]

Just replaced the rear passenger wheel bearing. The ABS lights came on soon thereafter. Any thoughts on the best way to diagnose the issue? (visually everything looks fine)

Sponsored

 

[GMB Racing]

read the code

 

[sculptor310]

The thing is it isn't throwing any codes...

 

[Rod Schneider]

The thing is it isn't throwing any codes...

Make sure that whatever scan tool you are using is capable of reading the ABS module. Most inexpensive scan tools won't do that. If the ABS light is on, it will almost always have a stored code.

 

[sculptor310]

Thanks for the advice. I'm using my SCT tuner - but no codes.

 

[kent0464]

Thanks for the advice. I'm using my SCT tuner - but no codes.

That won’t do, going to need a Snap-On scanner or similar to see what’s going on. You may want to take a good look at everything you touched while doing the rear passenger bearing.....

 

[KewlWinter]

Found this on the forum.

https://www.mustang6g.com/forums/threads/advancetrac-service-abs-traction-control-lights-on.59115/

 

[PoppinJ]

What is the part number for that centering crush washer. I cant seem to find it. Anybody know?

 

[PoppinJ]

This is for the black thrust washer between the axle shaft and bearing.

The part # is FR3Z-7G273-A and it can be ordered here https://parts.levittownfordparts.com/oem-parts/ford-washer-thrust-fr3z7g273a

Sponsored