Mootang
Well-Known Member
- Joined
- Oct 2, 2016
- Threads
- 66
- Messages
- 1,148
- Reaction score
- 415
- Location
- Sacto, Caliunicornia
- First Name
- Henry
- Vehicle(s)
- 2017 Mustang GT
- Thread starter
- #1
I have a set of Roush Single Adjustable Coilovers Kit that I recently took off the car. Comes with Vorshlag Camber & Caster plates. Great setup for someone with basic or close to stock suspension components and looking for a coilover setup. Not great for someone with heavy suspension upgrades (meaning no bushings in your suspension) based on my personal experiences.
Roush Single Adjustable Coilovers Kit
Vorshlag Camber & Caster Plates
I will not seperate the two as the camber plates are specifically designed for this coilover kit. No damage to them besides the nicks and scratches from installing and removing it twice. Comes with all the components needed and spanner wrenches. Never tracked/dragged or autocrossed in them. They were used when the car was just a weekender and no canyon or twisty roads miles on them. You will need the typical new bolts and old bolts to install this. A new Roush Single Adjustable Coilover kit is about $1800 and the Vorshlag Camber & Caster Plates are about $529 plus shipping. That is roughly $2300 for this setup new. Any questions or additional pictures, please feel free to let me know.
SOLD
Roush Single Adjustable Coilovers Kit
- Have about 5600 miles on them with some nicks and scratches. They are single adjustable, so only ride height adjustable. The spring rates are unknown and I did contact Roush asking about what the rates were. Roush does not release this information, but I do know they are progressive springs. The front struts upper bolt hole is slotted and offers some camber adjustments.
Vorshlag Camber & Caster Plates
- Have about 3500 miles on them as I installed them later during suspension upgrades. They were designed specially for the Roush Coilover kit. The caster is set to the highest and I measured out to +8 caster at the moment. You can set it back to the original of +6 to +7.
I will not seperate the two as the camber plates are specifically designed for this coilover kit. No damage to them besides the nicks and scratches from installing and removing it twice. Comes with all the components needed and spanner wrenches. Never tracked/dragged or autocrossed in them. They were used when the car was just a weekender and no canyon or twisty roads miles on them. You will need the typical new bolts and old bolts to install this. A new Roush Single Adjustable Coilover kit is about $1800 and the Vorshlag Camber & Caster Plates are about $529 plus shipping. That is roughly $2300 for this setup new. Any questions or additional pictures, please feel free to let me know.
SOLD
Sponsored
Last edited: