S550GTCS
Well-Known Member
- Thread starter
- #1
Selling a bunch of suspension parts removed from my 2016 GTCS. Most of these parts were installed for under 10,000 miles. Only selling because I ordered a Grand Sport and sold my GT.
I am mostly looking to sell the parts local. I am located in Stockton, CA, but can deliver pretty much anywhere in Norcal. Add an extra 25-50 bucks if I have to go out of my way to drive 50+ miles to you. Anything that is small and light enough to ship, I will be willing to ship at your expense.
PM me for my phone number if you want more pictures or want to make an offer on something. I will be pretty reasonable as I no longer need these at all since I no longer have an S550. I do have Signature forged wheels and an APR GT250 wing + trunk I will also sell for the cheap.
Album with pics of all the stuff:
https://imgur.com/a/Mhvw8L5
Parts and prices:
1. MCS 2 way w/remote reservoir dampers. These include Vorshlag caster camber plates, steeda rear spherical shock mounts, and 2 full sets of springs(1 hyperco set 350#F/550#R, 1 swift set 12kg/mm F/15kg/mm R). They have 6,000 street miles on them. MCS recommends around 25,000 before a rebuild.
These cost me around $5300 with 1 set of springs. They are setup as a true rear coilover rear.
SOLD
2. AP Racing Brakes by Stillen. Come with stainless steel brake lines. 40% life or so left on pads, 20% life or so left on rotor rings(Not sure how many miles on these. I put 2,000 on them but they were bought from Kakonn's old car).
Selling for $1100
3. Stock GT350 rear brakes w/everything included that's needed for swap: knuckles, drum parking brake etc. 80%+ life left on pads and rotors (~6000 miles on them). ARP EXTENDED STUDS IN PICTURE NOT INCLUDED
SOLD
4. ARP extended studs 1/2"-20 thread pitch + Gorilla 2" open ended lug nuts. 20 studs + 20 lug nuts. Pressed in once, and used for about 10,000 miles. Don't currently have pic but they are these with the optional gorilla lug nuts: https://cortexracing.com/product/wheel-stud-kit-2015-2017-ford-mustang-s550-front-and-rear/
SOLD
5. BMR sway bars front and rear. The front sway bars come with the optional stiffer Delrin bushings ($100 value). (~8000 miles on these)
Selling for $225.
6. Full tilt boogie racing front and rear adjustable sway bar end links (~7000 miles on these)
SOLD
7. Cortex Racing front sway bar end links. Tiny bit of stripping on one part of nut. (~1,000 miles on these. Liked the FTBR better)
Selling for $75
8. Watson Racing 4pt Roll bar. Note that I do not have the nut plate hardware because I bought this used and prior owner never gave it to me. I just used 3/8 hardware to mount the roll bar in my car. I do have the hardware that connects the rear bars to the hoop though.
Selling for $650
9. Steeda Camber plates (7500 miles on them)
SOLD
I am mostly looking to sell the parts local. I am located in Stockton, CA, but can deliver pretty much anywhere in Norcal. Add an extra 25-50 bucks if I have to go out of my way to drive 50+ miles to you. Anything that is small and light enough to ship, I will be willing to ship at your expense.
PM me for my phone number if you want more pictures or want to make an offer on something. I will be pretty reasonable as I no longer need these at all since I no longer have an S550. I do have Signature forged wheels and an APR GT250 wing + trunk I will also sell for the cheap.
Album with pics of all the stuff:
https://imgur.com/a/Mhvw8L5
Parts and prices:
1. MCS 2 way w/remote reservoir dampers. These include Vorshlag caster camber plates, steeda rear spherical shock mounts, and 2 full sets of springs(1 hyperco set 350#F/550#R, 1 swift set 12kg/mm F/15kg/mm R). They have 6,000 street miles on them. MCS recommends around 25,000 before a rebuild.
These cost me around $5300 with 1 set of springs. They are setup as a true rear coilover rear.
SOLD
2. AP Racing Brakes by Stillen. Come with stainless steel brake lines. 40% life or so left on pads, 20% life or so left on rotor rings(Not sure how many miles on these. I put 2,000 on them but they were bought from Kakonn's old car).
Selling for $1100
3. Stock GT350 rear brakes w/everything included that's needed for swap: knuckles, drum parking brake etc. 80%+ life left on pads and rotors (~6000 miles on them). ARP EXTENDED STUDS IN PICTURE NOT INCLUDED
SOLD
4. ARP extended studs 1/2"-20 thread pitch + Gorilla 2" open ended lug nuts. 20 studs + 20 lug nuts. Pressed in once, and used for about 10,000 miles. Don't currently have pic but they are these with the optional gorilla lug nuts: https://cortexracing.com/product/wheel-stud-kit-2015-2017-ford-mustang-s550-front-and-rear/
SOLD
5. BMR sway bars front and rear. The front sway bars come with the optional stiffer Delrin bushings ($100 value). (~8000 miles on these)
Selling for $225.
6. Full tilt boogie racing front and rear adjustable sway bar end links (~7000 miles on these)
SOLD
7. Cortex Racing front sway bar end links. Tiny bit of stripping on one part of nut. (~1,000 miles on these. Liked the FTBR better)
Selling for $75
8. Watson Racing 4pt Roll bar. Note that I do not have the nut plate hardware because I bought this used and prior owner never gave it to me. I just used 3/8 hardware to mount the roll bar in my car. I do have the hardware that connects the rear bars to the hoop though.
Selling for $650
9. Steeda Camber plates (7500 miles on them)
SOLD
Sponsored
Last edited: