Roots SC and A6 3.15 launch?

[HoustonGT]

Just got my MT ET street R radial 305/45r17 rears and am ready to hit the track soon. What's the best method for launching a whipple gen 2 stage 2 car, pbd tune, 3.625 pulley with A6 and 3.15 gears? I've got the bmr cb005, bmr drag springs, steeda fixed shocks and vertical links.

Other whipple or roots SC cars, are you mashing it from the get go or get it rolling a little before WOT?

Looking forward to my first nite at the track. Thanks for any input you have.

Sponsored

 

[SolarFlare]

manual mode, start burnout in 1st then shift to 2nd then let off the brake and roll forward. I do similar to a quick clutch slip. slowly bring up the RPMs from idle to 1400ish, as I cross 1400 I get on the throttle hard and get off the brakes.

 

[1quick]

I have a roush but I leave at 2000-2200rpm and just mash it as i let off the brake, pulled a 1.4 60 and went 9.9 at 139 a couple weeks ago useing this method

 

[HoustonGT]

Nice 60"! What tires? Any suspension mods?

 

[1quick]

Nice 60"! What tires? Any suspension mods?

totally stock suspension, 305/40/18 et street ss at 17psi, i ordered a couple small suspension mods going to go back and try and knock that down a touch more before the end of the season

Sponsored