Recent content by Horizon5.0

i would definitely get a 30 sidewall which keeps it near factory size on a 20 inch wheel. but with a 20x11 ET50, extended studs, 25mm slip on spacer, and camber plates, that would not cause issues with rubbing correct? it would be a 305/30r20. and how much camber would i need? i’m not worried...

I have a 2019 gt pp1 and i’m ordering custom forged wheels. i was previously looking at 20x10 +35 and 20x11 +50 for the front and rear, but now im kinda interested in going 20x11 square. do i have to worry about clearance with 20x11 +50 with a spacer and 305/30 tires? my car is lowered on bmr...

I recently found your post when trying to polish mine and followed your suggestions. i used grants pads instead of griots but it still turned out great. the first picture is after a wash and clay, and the second is after polishing.

yeah that’s what i was thinking it’s a lot smaller than the stock and they’re already small. i saw someone saying it’s better for pure performance but they’d look a little small

I have a 2019 PP1 GT and I’m getting 19x10 +35 and 19x11 +50 wheels from lmr, and i’m conflicted on what size michelin ps4s i should get for the front. i plan on getting 305/30r19 rears, but i can’t decide between 285/30 and 285/35. my car is lowered with bmr handling springs, and i will be...

so a 1 inch spacer with the 19x10.5 front wheels won’t stick past the fender or rub? i plan on going for 305/30r19 and 315/30r19 since that is what the pp2 and m1hp come with factory. but are you saying the spacers are absolutely necessary to not rub?

I have a 2019 PP1 GT with BMR Handling springs which lower the front 1-1.2 inches. i plan on upgrading to fp track shocks and struts eventually and i want to get pp2 or mach 1 handling wheels with 305/30r19 in the front and 315/30r19 in the rear. if i dont use a spacer on the front, will they...

I have a set of original PP1 19x9 wheels with 255/40r19 Michelin Pilot Sport All Season 4 with a little over 12 thousand miles on them, and a set of American Muscle PP1 style 20x10 wheels with 305/35r20 Michelin Pilot Sport 4S with about 10 thousand miles on them. the tread on both are great...

I’m trying to hang a small exhaust hanger to hold up the front end of the h pipe off this bolt but i have no clue what size it is. does anyone know what size nut i would need?

I installed new speakers in my 2019 mustang and the rears have tweeters. My Forscan does not have a normal Audio Control Module, it only has the As Built Format option. What thing do I change in as build to change both rear deck corner speakers to woofer and tweeter?

I’m looking at getting a Ratiotek valve body for my 10R80 GT. My main question is if it’s actually worth it. They have two different models and i’m wondering if there’s a benefit to the PR over the PRX. And is it a simple thing to install that can be done with simple tools in a few hours, or is...

ok that is good to hear, but what about the tapping/ticking sound from in the valve cover?

I have a 2019 mustang gt and recently my ac compressor locked up and fried the clutch. i have shut off my ac and taken out the fuse for the compressor but ever since my engine now makes these sounds. the first is a vibrating sound coming from the hose connecting the oil catch can to the...

i can’t. they aren’t open on weekends and this needs to be done before monday morning.

I have a 2019 mustang gt and i ordered a BMR CB005R from American Muscle. it only came with two of the black cups in the pictures and installation guide, which shows four. it shows there should be two taller ones and two shorter ones. I contacted American Muscle and they sent another one 5 days...