Anyone running Advanti DST HY Hybris?

[z06psi]

11s with 315s also look really sexy.

Sent from my SM-N910V using Tapatalk

Sponsored

 

[robw_39]

11s with 315s also look really sexy.

I'm sure it will look awesome. For me it was about the weight I hate that the stock wheels are so heavy they look good but not as good as the new wheels will look.

 

[Niz55]

Just ordered these wheels for my 2016 white GT PP in black of course ... I opted for new tires as well went with the Continental Extreme Contact DWS tires in stock size... figure if I was going to get light wheels it only made sense to get the lightest tires they also seem to review better then the stock rubber... overall I should drop 60lbs of rotating mass

So I might have some very very low mileage wheels and tires for sale soon lol only have 200 miles on the car.

The continental are good tires. Only thing I hate about them are soft side walls.

 

[Kbreese]

My rear 9.5s will be up for sale soon. Should have my 11s by the end of January.

Sent from my SM-N910V using Tapatalk

I'm confused, why are you selling the rears, I thought you were going to have them widened to 11"....are you buying a new set of 2 of the same wheels to have them widened?...or you are going to have mismatched wheels?

 

[z06psi]

Bought a completely new set and had them shipped to weldcraft. I will sell the 9.5s when the 11s show up.

Sent from my SM-N910V using Tapatalk

 

[Kbreese]

Bought a completely new set and had them shipped to weldcraft. I will sell the 9.5s when the 11s show up.

Sent from my SM-N910V using Tapatalk

Gotcha. How much is weldcraft charging and any idea what the new weight of the wheel will be? I have no idea how wheel widening works. DO they use the same flow formed material so it's all consistent and remains relatively light weight?

 

[MagneticXV]

^^Im also curious on how much they're charging you and how much weight will be added ?

 

[robw_39]

My Wheels come in tomorrow... I am going to see if I can set up some time at my Friends shop he has a Dynojet Dyno and do a baseline run with the stock PP wheels and them with Advanti DST Hybirs wheels and see what the difference is...

I have heard you can free up as much as 1 rwhp per 3 lbs of reduced unsprung weight.

I will be saving about 14.5lbs per tire in the rear with the swap so 29lbs total...

If this is true I should gain around 9.6 rwhp on the dyno. I don't expect I will but who knows... It will be interesting to see what gains I get if any.


I will also be putting on a Gibson exhaust this coming weekend... I will dyno it after the install as well to prove Gibson are LYING lol... but I hope it gives some rwhp improvement.

Anyway I will update this thread once I have done my tests.

 

[Kbreese]

My Wheels come in tomorrow... I am going to see if I can set up some time at my Friends shop he has a Dynojet Dyno and do a baseline run with the stock PP wheels and them with Advanti DST Hybirs wheels and see what the difference is...

I have heard you can free up as much as 1 rwhp per 3 lbs of reduced unsprung weight.

I will be saving about 14.5lbs per tire in the rear with the swap so 29lbs total...

If this is true I should gain around 9.6 rwhp on the dyno. I don't expect I will but who knows... It will be interesting to see what gains I get if any.


I will also be putting on a Gibson exhaust this coming weekend... I will dyno it after the install as well to prove Gibson are LYING lol... but I hope it gives some rwhp improvement.

Anyway I will update this thread once I have done my tests.

Cool, looking forward to the results.

 

[valentinoamoro]

My Wheels come in tomorrow... I am going to see if I can set up some time at my Friends shop he has a Dynojet Dyno and do a baseline run with the stock PP wheels and them with Advanti DST Hybirs wheels and see what the difference is...

I have heard you can free up as much as 1 rwhp per 3 lbs of reduced unsprung weight.

I will be saving about 14.5lbs per tire in the rear with the swap so 29lbs total...

If this is true I should gain around 9.6 rwhp on the dyno. I don't expect I will but who knows... It will be interesting to see what gains I get if any.

I will also be putting on a Gibson exhaust this coming weekend... I will dyno it after the install as well to prove Gibson are LYING lol... but I hope it gives some rwhp improvement.

Anyway I will update this thread once I have done my tests.

Are you going square?

 

[mada808]

Sweet! Glad I found this thread. I have these wheels as the previous owner put them on. I didn't know much of anything about them. I have 8.5 up front and 9.5 rears and running stock tires. They look great and I love the concave rears.

 

[Kbreese]

Looks good Mada!

 

[mada808]

Looks good Mada!

Thank you!

 

[2015GT]

Has or can someone test fit the 9.5 on the front? I asked tire rack they said no but would really like these for a 275 or 285 square set up.

 

[Kbreese]

Has or can someone test fit the 9.5 on the front? I asked tire rack they said no but would really like these for a 275 or 285 square set up.

Yeah earlier in this thread a member put the rears on the front. The fit fine, but the center cap won't go on. Maybe a spacer would work to be able to get the center cap on.

Sponsored