Anyone running Advanti DST HY Hybris?

[LiquidTJ]

Little HDR with my g2 phone. I also plasti dip the mirrors, than hit it with ultra bright silver and gloss,clear. Reason I used plasti dip was so I can peel it off later. Came up with this idea after watching transporter.haha.

Awesome ride Niz!

Question for all y'all: I have a set of these wheels in 19x8.5 on my S197 daily driver right now, and they have all-weather tires on them. I'm thinking about getting a new 'Stang with the GT Performance Package, and I'd like to put my current wheels on it for wintertime and such. But I donno if they will fit over the Brembo brakes!

I see here that they fit over Niz' Brembos just fine. Those are 19x9.5, but they should fit exactly the same over 8.5's, right? Assuming Niz doesn't have a spacer ring in there?

Sponsored

 

[z06psi]

8.5s fit fine over the Brembos

Sent from my SM-N910V using Tapatalk

 

[LiquidTJ]

8.5s fit fine over the Brembos

Thanks! I somehow failed to read pages 2-5 of this thread before, so now I've seen you pics and also that Niz' setup is staggered, and how he swapped front-to-back earlier. Helps a lot!

 

[z06psi]

I am not really 100% happy with the offset but I will get some custom spacers for both the front and the back. Already reached out to Weldcraft to have a set of rears widened to 11".

Sent from my SM-N910V using Tapatalk

 

[Kbreese]

I am not really 100% happy with the offset but I will get some custom spacers for both the front and the back. Already reached out to Weldcraft to have a set of rears widened to 11".

Sent from my SM-N910V using Tapatalk

Offset not as aggressive as you'd like? Seems most wheels sold by Tire Rack don't have an aggressive offset.

 

[z06psi]

Yeah the front needs to come out about 15mm and the rear about 10mm but the rears need to be 11" wide.

Sent from my SM-N910V using Tapatalk

 

[Niz55]

I am not really 100% happy with the offset but I will get some custom spacers for both the front and the back. Already reached out to Weldcraft to have a set of rears widened to 11".

Sent from my SM-N910V using Tapatalk

Any news on weldcraft? I might go with 20x9.5 in the back and have it widen to 10.5" so I can run 295

every time I look at my car it seems that the rear wheels are little smaller. :shrug:

 

[z06psi]

Nope not yet. I will either send another email or call them.

 

[IdTamer]

nice choice!

They look sweet in black too... and you can run the 19x9.5 +40mm on all fours with a 5mm spacer to get center caps on most likely.

Anybody try this setup? Don't see anyone running them as a square setup and want to give it a try

 

[Kbreese]

Did anyone get these in a squared 19x9.5 setup, and use spacers? I'm curious if you can get the front cap on with a mild spacer like 10mm.

 

[robw_39]

Just ordered these wheels for my 2016 white GT PP in black of course ... I opted for new tires as well went with the Continental Extreme Contact DWS tires in stock size... figure if I was going to get light wheels it only made sense to get the lightest tires they also seem to review better then the stock rubber... overall I should drop 60lbs of rotating mass

So I might have some very very low mileage wheels and tires for sale soon lol only have 200 miles on the car.

 

[IdTamer]

Just ordered these wheels for my 2016 white GT PP in black of course ... I opted for new tires as well went with the Continental Extreme Contact DWS tires in stock size... figure if I was going to get light wheels it only made sense to get the lightest tires they also seem to review better then the stock rubber... overall I should drop 60lbs of rotating mass

So I might have some very very low mileage wheels and tires for sale soon lol only have 200 miles on the car.

What setup did you get? Thanks !

 

[robw_39]

What setup did you get? Thanks !

I did the standard 19" 8.5 front and 19" 9.5 rear... I'm fine with the 255 up front 275 rear tire sizes.

 

[z06psi]

My rear 9.5s will be up for sale soon. Should have my 11s by the end of January.

Sent from my SM-N910V using Tapatalk

 

[robw_39]

My rear 9.5s will be up for sale soon. Should have my 11s by the end of January.

Sent from my SM-N910V using Tapatalk

Yeah well I guess you need more than 275' in the rear... I don't plan on having more than bolt on power... shooting for 440 rwhp that will do for me...

Sponsored