PP owners running aftermarket sway bars

[Todd15Fastback]

You should be able to buy the Steeda bars for cheaper

Yep. PM David@steeda on the board here

Sponsored

 

[yellowstangatl]

BMR sway set is $380:
http://www.bmrsuspension.com/?page=products&productid=1495&superpro=0

Steeda sway bar set $460:
http://www.steeda.com/steeda-mustang-front-and-rear-sway-bar-kit-2015-555-1017/

Ford Racing is $480. Steeda has a welded endpiece where BMR is pressed. Another $180 if you want those Steeda billet sway bar mounts

Steeda Sways @ $349, maybe a vendor will price match. Also discounts are sometimes available from Steeda if you ask a rep.

http://www.stranoparts.com/partdetails.php?PartID=1198&CategoryID=296&ModelID=40

Sam has his version of rear sway he's selling as well on his site.

 

[ForTehNguyen]

now thats a great price

 

[Niz55]

Is that the steeda kit for 349?

 

[Todd15Fastback]

Is that the steeda kit for 349?

Yep, it is. Time for you to buy it ASAP

 

[Seatown Stang]

CJ pony shows them for $389....but the page to order them wont load

http://www.cjponyparts.com/mustang-suspension/c/60170000/

 

[Niz55]

Yep, it is. Time for you to buy it ASAP

Yes it is

 

[ForTehNguyen]

is it recommended to get new end links?

 

[Todd15Fastback]

is it recommended to get new end links?

Nope, not with the Steeda bars.

 

[Nanashii]

is it recommended to get new end links?

I will be getting new end links at some point.

 

[Todd15Fastback]

I will be getting new end links at some point.

I will eventually, too. Just did not need them at the start.

 

[Finally]

Do any of these aftermarket sway bars develop squeaks? I had a set on another car many years ago, and I had to disassemble the bushing clamps several times a year to lubricate them. Don't want to have to do that again. Thanks!

 

[alimustafa23]

BMR sway set is $380:
http://www.bmrsuspension.com/?page=products&productid=1495&superpro=0

Steeda sway bar set $460:
http://www.steeda.com/steeda-mustang-front-and-rear-sway-bar-kit-2015-555-1017/

Ford Racing is $480. Steeda has a welded endpiece where BMR is pressed. Another $180 if you want those Steeda billet sway bar mounts

I wonder how the BMR sway bars stack up to the Steeda ones. Can anybody who had them on for a while chime in?

-M

 

[ForTehNguyen]

got an email from stano saying the introductory price isnt valid anymore

I also would like to know if anyone has BMR sways, they are less expensive and will be red just like the cradle support system I bought from them. Kind of want to avoid having a rainbow under my car.

Do any of these aftermarket sway bars develop squeaks? I had a set on another car many years ago, and I had to disassemble the bushing clamps several times a year to lubricate them. Don't want to have to do that again. Thanks!

these include bushing lube to apply during installation

 

[Todd15Fastback]

Do any of these aftermarket sway bars develop squeaks? I had a set on another car many years ago, and I had to disassemble the bushing clamps several times a year to lubricate them. Don't want to have to do that again. Thanks!

If you buy from a good vendor and use a good quality lube, you will not have any squeaks. Of course they need to be installed correctly, too.

I have the full Steeda suspension setup on my car (except for 2 parts) and put my car thru the Tail of the Dragon 2.5 weeks ago and have zero squeaks. It is as quiet as it was when stock.

Sponsored