TE37 Ultras on!

[kkakonn]

Finally got them on after a long few months of waiting. Final wheel specs were 20x10 +30 and 20x11 +40 tires are 275.35 and 295.35 Nitto Invos. Pictured below was when I attempted to run 315.35 on the rear but it was too aggressive and I already had camber maxed out. Going down to a 295 fixed all of that.

Sponsored

 

[MELLOWYELLOW06]

That looks HOTTTTTT

 

[rozay]

love the look

 

[AMWill]

Finally got them on after a long few months of waiting. Final wheel specs were 20x10 +30 and 20x11 +40 For now the tires are 275/35 and 315/35. The rears are definitely a little aggressive for the car and rubbing on dips and such on the freeway. I think a little camber adjustment in the back should help get most of the annoying rubbing out, possibly considering going down a tire size after that is set. For now here is a quick shot until I can get some more.

Looking so sick man!

Glad to see that you finally got them on.

What's next on the build list?

-Will

 

[kkakonn]

Looking so sick man!

Glad to see that you finally got them on.

What's next on the build list?

-Will

Thanks Will! Going to enjoy her as is for now. Already did all the BMR suspension stuff (Sway bars, end links, vert links, cradle bushing, and toe arms) Once more coilover options are available I'll consider replacing the eibach springs I have now. I just put in an order for a custom Voltex wing =[ 6-9 months

 

[Need4SpeedMotors]

that looks awesome as hell !

 

[GetYourWheels]

Dang Mike, that came out bad ass!
Of course you went with the 315/35s anyways

Cant want to see what else you do with the car, knowing you, you're far from done!

 

[kkakonn]

Dang Mike, that came out bad ass!
Of course you went with the 315/35s anyways

Cant want to see what else you do with the car, knowing you, you're far from done!

Thanks Jason! I had to try it otherwise I would've kept thinking "what if". Lol now I know, hopefully additional camber will fix it. Only thing I have to wait for now is a custom built Voltex wing, 6-9 months =[

 

[Todd15Fastback]

Wheels look great!

How much camber do you think you will have to run? -2? -3?

My WORK wheels are 20x11+45 but I am running 305/35/20. Hankook's but not sure if they run wide like MPSS or narrow like Nitto's.

 

[GetYourWheels]

Thanks Jason! I had to try it otherwise I would've kept thinking "what if". Lol now I know, hopefully additional camber will fix it. Only thing I have to wait for now is a custom built Voltex wing, 6-9 months =[

Holy cow man, you could have 2-3 cars built in that amount of time! But it'll look crazy with the wing.
I'm sure the car will be fully wrapped and on air by that time though, lol

 

[kkakonn]

Some more shots with the 315 tire in the back before I changed it out

 

[kkakonn]

Wheels look great!

How much camber do you think you will have to run? -2? -3?

My WORK wheels are 20x11+45 but I am running 305/35/20. Hankook's but not sure if they run wide like MPSS or narrow like Nitto's.

Thanks! Currently the passenger rear is at -1.5 i hit a couple of good dips on the freeway and had a decent amount of tire residue chunked onto the fender when I got home. driver rear is at -2.4 and its good, fenders were good and didn't notice any rubbing on the tire sidewall.

I think you've nailed the perfect fit with the 20x11+45. Good balance of an aggressive wheel fitment and allowing a meaty tire. If my set up sat 5mm inward it would've been perfect

 

[GoldnAzn]

Dude I wanna see this in person... Looks BAD A$$!!!

 

[Ron@cp-e]

by far the best wheel set up I've seen on a S550
well done sir!

 

[Jackie Chan]

Its not my favorite, but I think it would look pretty BA with the emblems bronzed and the exhaust blacked out(or bronzed but that be overkill)

Sponsored