Does a 35 offset Fit 2015 Mustang GT?

[L8APEX]

Wheel Specifications:
Dimensions: 10" x 18"
Bolt Pattern: 5 x 114.3
Offset: 35

Sponsored

 

[L8APEX]

Follow up question, will a 48 offset fit?

 

[Anthony@HTM]

35 will poke in the back really bad

Front should be ok.

Running
18x10 plus 35 front
18x10 plus 48 rear

Will work.

 

[MRRDesignWheels]

18x10 35et will fit the front with out any issues just verify caliper clearance with manufacture or seller
18x10 rears need about a 43et-48et max to fit inside the quarter panel lines.

 

[Need4SpeedMotors]

a 18x10 ET 35 is dead flush on the rear of the quarter panel and depending on the drop or tire it could buldge out, a 18x10 Et 40 is more preferable for all around fitment if you want to run a square fitment.

 

[MRRDesignWheels]

a 18x10 ET 35 is dead flush on the rear of the quarter panel and depending on the drop or tire it could buldge out, a 18x10 Et 40 is more preferable for all around fitment if you want to run a square fitment.

Lets fight millimeters here !!!
My 43et is better then your 40et :rant: :hitcomputer:
Joke guys 40et will work perfect especially squared set up/

 

[Need4SpeedMotors]

Lets fight millimeters here !!!
My 43et is better then your 40et :rant: :hitcomputer:
Joke guys 40et will work perfect especially squared set up/

We could do that but I know my S550 fitments, you can call me the machinist

 

[smdandb2]

19x10.5 +35 for me on the rear. It DOES poke a little.

 

[MRRDesignWheels]

19x10.5 +35 for me on the rear. It DOES poke a little.

Im with you 40et and up !!

Sponsored