Blk2015GT
Well-Known Member
- Thread starter
- #1
Having been around for a while and keeping an eye on the marketplace, there seems to be 1 item that no one has for sale.
A lot of us threw out our OEM systems for a catback but now want to switch the axleback part and the midpipes don't match (or need the OEM piping). I see a ton of Wanted to Buy OEM exhausts now.
Some manufacturer must be interested in bending some 2.5" pipe that matches the OEM midpipes from the resonator to the OEM mufflers on each side. They could be full length and cut to fit even (or better make them sized to match with Borla/Roush as that seems to be the most popular axleback; and maybe a few popular brand name axlebacks)
Everyone sells the H/X and axlebacks kits (like the Roush), but no piping to connect the 2 and some of us don't have the OEM system anymore to get donor piping. I would much rather have a clamp in (pre-cut/sized preferred) solution like the axleback kit was made for, rather than need to go to an exhaust shop and get custom pipe bent and sit there for an hour or 2.
I would gladly pay $50-100 for something like this product. That's about how much a shop would charge to bend the midpipes and bend/weld on the hangers.
A lot of us threw out our OEM systems for a catback but now want to switch the axleback part and the midpipes don't match (or need the OEM piping). I see a ton of Wanted to Buy OEM exhausts now.
Some manufacturer must be interested in bending some 2.5" pipe that matches the OEM midpipes from the resonator to the OEM mufflers on each side. They could be full length and cut to fit even (or better make them sized to match with Borla/Roush as that seems to be the most popular axleback; and maybe a few popular brand name axlebacks)
Everyone sells the H/X and axlebacks kits (like the Roush), but no piping to connect the 2 and some of us don't have the OEM system anymore to get donor piping. I would much rather have a clamp in (pre-cut/sized preferred) solution like the axleback kit was made for, rather than need to go to an exhaust shop and get custom pipe bent and sit there for an hour or 2.
I would gladly pay $50-100 for something like this product. That's about how much a shop would charge to bend the midpipes and bend/weld on the hangers.
Sponsored