Does anyone make a hood black out style decal for 18+ mustangs?

[Mustangpursuit]

I was pondering about doing something a bit different than a GT/CS logo custom Mach 1 style hood decal. I always liked the classic black out with pin stripes. And maybe do it in magnetic grey or gloss black with red pin stripes over a silver car? I have yet to find any site that sells this type for 18+ like Steeda and CDC have, but they do not sell the decal. So this would be more of a custom wrap route than a pre-made decal? Must be hard getting that pin-stripe on like the CDC one if it was a custom wrap? I also like how they both contour carefully into the hood side edges short of the fenders so they dont need to be applied to the fender upper surface behind the hood section. The designs is also nicely curves and ends before the front edge of the hood to bumper section. Painting is an option by using some sort of stencil but I am not sure if it would look good as a permanent thing?

Sponsored

 

[CBETPTA]

A vinyl wrap could be done, especially with kniveless cutting

 

[CR151S]

My vinyl wrap was done locally and is VERY similar to what you show here.

It doesn’t photograph well since it’s black on black..

 

[RowdyRam]

I did some research myself on this very idea and found a video of the way Steeda does theirs:

 

[Mustangpursuit]

I did some research myself on this very idea and found a video of the way Steeda does theirs:

I guess the CDC one was probably harder trying to do the pinstripes around? or probably they used some pin-strip kit to just add to the borders.

 

[tj@steeda]

We did a custom carbon fiber hood for the White Carbon Edition - SpeedKore partnered with us to make this happen!

Sponsored