Can someone confirm this Project 6GR setup will fit my GT?

[Doolin64]

My car is running BMR minimum drop springs.

I'd like to run this setup. Should I wider up front?

Project 6GR 5-FIVE 20x10 F 20x11 R
285/35/20 front
315/35/20 rear

Sponsored

 

[BigR4444]

Well I've got 275/35/20 up front, and 305/35/20 in the rear... and I've got Steeda progressives which are about an inch drop, so I think you'll be fine with those springs

My only issue would be that I've got 20x10 up front and 20x11 in the rear;
it appears like you've got 20x10 all around and I don't know if those 315s would go on a 20x10. I could be wrong.

 

[Doolin64]

Sorry, I deleted too much. It's a 20x11 rear.

 

[MAGS1]

Agree with BigR, 315 on a 10” wheel is a bit large, it’s going to bulge. You really need an 11” or 11.5” wheel for a 315 tire. If you’re running 20x10 all around why not run a square tire setup? I run 20x10 with 285/35 square and it’s great.

edit, just saw you have 20x11 rear. You’re all good

 

[BigR4444]

Sorry, I deleted too much. It's a 20x11 rear.

Ah ok, that makes sense.
Your tires are a bit wider than mine but I believe that setup works. I think I heard from people who have that setup and run 285/315 and have no problems.

I don't think your springs will be a problem at all. Pretty sure lots of us have bigger drops than you with no issues

 

[Doolin64]

I wouldn't mind a little more drop but it's tough enough to climb out of now.

Sponsored