Mootang
Well-Known Member
- Joined
- Oct 2, 2016
- Threads
- 66
- Messages
- 1,148
- Reaction score
- 415
- Location
- Sacto, Caliunicornia
- First Name
- Henry
- Vehicle(s)
- 2017 Mustang GT
- Thread starter
- #1
I have a pair of BMR motor mount brackets that are adjustable. Product number is MM008 and they are brand new. I never installed them, just took it out of packaging for pictures. Got them to use with my setup, but ended up not needing to lower the engine anymore. I got them at $170 at the time.
Note, these mounts (MM008) will work with the BMR MM007 motor mounts, but according to BMR tech "...they do require either a shorter bolt or you need to shim a little to take up for the shank of the bolt. It is pretty simple." listing in another post (https://www.mustang6g.com/forums/th...roduct-s550-motor-mount-brackets-mm008.85723/). I don't think they were designed to work together, but I don't know. If you have the stock mounts, then you are fine.
SOLD
Any questions, let me know.
Note, these mounts (MM008) will work with the BMR MM007 motor mounts, but according to BMR tech "...they do require either a shorter bolt or you need to shim a little to take up for the shank of the bolt. It is pretty simple." listing in another post (https://www.mustang6g.com/forums/th...roduct-s550-motor-mount-brackets-mm008.85723/). I don't think they were designed to work together, but I don't know. If you have the stock mounts, then you are fine.
SOLD
Any questions, let me know.
Sponsored
Last edited: