Streetfighter Mustang
Well-Known Member
- Joined
- Aug 2, 2015
- Threads
- 58
- Messages
- 438
- Reaction score
- 320
- Location
- Australia
- Website
- www.streetfighter.net.au
- First Name
- David
- Vehicle(s)
- 2015 GT Mustang
- Thread starter
- #1
2015-19 Mustang Streetfighter Exhaust Options Available.
Since the release of the Mustang into Australia Streetfighter have been manufacturing one of the worlds premium exhaust systems for the RHD Mustang.
With the addition of the factory bi modal (Active Muffler) system , we have found many owners are more than pleased with the sound of the 2018-19 factory mufflers.
The only problem lies in trying to make extra power!
The stumbling block for our RHD Australian Mustangs has always been the factory right hand header being restricted and preventing full power potential.
Unfortunately the new 2018-19 GT and Bullitt Mustangs have retained the same restrictive right factory header.
The 2018-19 Mustang has increased it power from 306kw to 339kw over the previous model. This is an amazing 33kw over the previous model on essentially the same engine. Most of the extra power has been achieved from the Ford engineers extracting the very most from this engine essential by up-tuning to it maximum capability.
Therefore when searching for any type of real power gain when performance tuning, it becomes vital to replace the headers and cats on all Mustang models including the new 2018-19.
Therefore Streetfighter have developed the following options for various requirements.
To fit 2015-19 Australian GT V8 / Bullitt Mustang
Streetfighter Headers and Highflow cats.(2015-2019 Mustang)
(Retains the factory centre section and rear Bi-Modal Mufflers)
With tuning can increase power by 20 kw / slight improved note
Includes:
Ceramic coated , tuned length 1 7/8 Headers
High flow 100 cell stainless steel cats and 3 inch pipe.
Streetfighter Cat-Back System (2015-2019 Mustang) Non Active Mufflers
Recommended for awesome improved sound over factory / very little power gains
Includes:
3 inch mandrel bend stainless piping
Massive 3 inch Stainless steel resonators (Guarantees NO Drone)
Streetfighter SLC Mufflers with dual or quad 4 inch Tips (2015-17 models require rear valance with quad tip option)
Streetfighter Cat-Back System (2018-2019 Mustang) Active Mufflers
Recommended for awesome improved sound over factory / very little power gains
Includes:
3 inch mandrel bend stainless piping
Massive 3 inch Stainless steel resonators (Guarantees NO Drone)
Streetfighter SLC Mufflers with quad 4 inch Tips with Active Mufflers
Streetfighter Full Exhaust (2015-2019 Mustang) Non Active Mufflers
Recommended for absolute best sound and absolute best power gains when tuning (up to 60 kw gains) naturally aspirated vehicles and of course for all supercharged applications..
Includes:
Ceramic coated , tuned length 1 7/8 Headers
High flow 100 cell stainless steel cats and 3 inch pipe.
3 inch mandrel bend stainless piping
Massive 3 inch Stainless steel resonators( Guarantees NO Drone)
Streetfighter SLC Twin 4 inch Dual or Quad Tip Mufflers (2015-17 models require rear valance with quad tip option)
Streetfighter Full Exhaust (2018-2019 Mustang) Active Mufflers
Recommended for absolute best sound and absolute best power gains when tuning (up to 60 kw gains) naturally aspirated vehicles and of course for all supercharged applications..
Includes:
Ceramic coated , tuned length 1 7/8 Headers
High flow 100 cell stainless steel cats and 3 inch pipe.
3 inch mandrel bend stainless piping
Massive 3 inch Stainless steel resonators( Guarantees NO Drone)
Streetfighter SLC Twin 4 inch Tip Active Mufflers
All Streetfighter headers are tuned length 4 into 1 for premium performance, balance and sound.
For more information contact
[email protected]
www.streetfighter.net.au
Since the release of the Mustang into Australia Streetfighter have been manufacturing one of the worlds premium exhaust systems for the RHD Mustang.
With the addition of the factory bi modal (Active Muffler) system , we have found many owners are more than pleased with the sound of the 2018-19 factory mufflers.
The only problem lies in trying to make extra power!
The stumbling block for our RHD Australian Mustangs has always been the factory right hand header being restricted and preventing full power potential.
Unfortunately the new 2018-19 GT and Bullitt Mustangs have retained the same restrictive right factory header.
The 2018-19 Mustang has increased it power from 306kw to 339kw over the previous model. This is an amazing 33kw over the previous model on essentially the same engine. Most of the extra power has been achieved from the Ford engineers extracting the very most from this engine essential by up-tuning to it maximum capability.
Therefore when searching for any type of real power gain when performance tuning, it becomes vital to replace the headers and cats on all Mustang models including the new 2018-19.
Therefore Streetfighter have developed the following options for various requirements.
To fit 2015-19 Australian GT V8 / Bullitt Mustang
Streetfighter Headers and Highflow cats.(2015-2019 Mustang)
(Retains the factory centre section and rear Bi-Modal Mufflers)
With tuning can increase power by 20 kw / slight improved note
Includes:
Ceramic coated , tuned length 1 7/8 Headers
High flow 100 cell stainless steel cats and 3 inch pipe.
Streetfighter Cat-Back System (2015-2019 Mustang) Non Active Mufflers
Recommended for awesome improved sound over factory / very little power gains
Includes:
3 inch mandrel bend stainless piping
Massive 3 inch Stainless steel resonators (Guarantees NO Drone)
Streetfighter SLC Mufflers with dual or quad 4 inch Tips (2015-17 models require rear valance with quad tip option)
Streetfighter Cat-Back System (2018-2019 Mustang) Active Mufflers
Recommended for awesome improved sound over factory / very little power gains
Includes:
3 inch mandrel bend stainless piping
Massive 3 inch Stainless steel resonators (Guarantees NO Drone)
Streetfighter SLC Mufflers with quad 4 inch Tips with Active Mufflers
Streetfighter Full Exhaust (2015-2019 Mustang) Non Active Mufflers
Recommended for absolute best sound and absolute best power gains when tuning (up to 60 kw gains) naturally aspirated vehicles and of course for all supercharged applications..
Includes:
Ceramic coated , tuned length 1 7/8 Headers
High flow 100 cell stainless steel cats and 3 inch pipe.
3 inch mandrel bend stainless piping
Massive 3 inch Stainless steel resonators( Guarantees NO Drone)
Streetfighter SLC Twin 4 inch Dual or Quad Tip Mufflers (2015-17 models require rear valance with quad tip option)
Streetfighter Full Exhaust (2018-2019 Mustang) Active Mufflers
Recommended for absolute best sound and absolute best power gains when tuning (up to 60 kw gains) naturally aspirated vehicles and of course for all supercharged applications..
Includes:
Ceramic coated , tuned length 1 7/8 Headers
High flow 100 cell stainless steel cats and 3 inch pipe.
3 inch mandrel bend stainless piping
Massive 3 inch Stainless steel resonators( Guarantees NO Drone)
Streetfighter SLC Twin 4 inch Tip Active Mufflers
All Streetfighter headers are tuned length 4 into 1 for premium performance, balance and sound.
For more information contact
[email protected]
www.streetfighter.net.au
Sponsored