New Mustang direct fit Flowforged by MRR wheels Preview

[Paul@PKAUTODESIGN]

on its way !

Sponsored

 

[CarlosMRRDesignWheels]

Here is a freshly built and finished F6180 shown in a custom Textured matte black finish. only 21.3lb each wheel in 19" and a nice 21.7 in a 20" depending on specs.
please do let us know your thoughts.

 

[ronnieb1958]

Here is a freshly built and finished F6180 shown in a custom Textured matte black finish. only 21.3lb each wheel in 19" and a nice 21.7 in a 20" depending on specs.
please do let us know your thoughts.

waiting to see a gloss black...

 

[CarlosMRRDesignWheels]

waiting to see a gloss black...

coming soon

 

[ronnieb1958]

coming soon

I'm sure you guys have a master list of sizes/offsets for each wheel you manufacture, right?

learning that you have a 35et for 275/35/19 19x9.5 and a 40et for a 285/35/19 19x10 is a big help cause I've got to have a flush look with no tire stretch! It's hard enough making up one's mind without that info.

 

[Paul@PKAUTODESIGN]

19x9.5 ET 30 all around
19x10 ET 35 all around

Both would be flush fitment.

 

[CarlosMRRDesignWheels]

I'm sure you guys have a master list of sizes/offsets for each wheel you manufacture, right?

learning that you have a 35et for 275/35/19 19x9.5 and a 40et for a 285/35/19 19x10 is a big help cause I've got to have a flush look with no tire stretch! It's hard enough making up one's mind without that info.

Yes sir, plus we use the knowledge and experience from many of our authorized dealers and since we have the capability to custom build off sets is fairly easy to get the exact spec your looking for.

 

[Paul@PKAUTODESIGN]

Yes sir, plus we use the knowledge and experience from many of our authorized dealers and since we have the capability to custom build off sets is fairly easy to get the exact spec your looking for.

I say we make him a set, make him a believer ! LOL

 

[ronnieb1958]

19x9.5 ET 30 all around
19x10 ET 35 all around

Both would be flush fitment.

for the 19x9.5, would the tire size be a 275/30/19?

 

[CarlosMRRDesignWheels]

hmm check this one out guys would love your feed back, get involved and help us create the next wheel model, be part of the process
https://www.mustang6g.com/forums/th...els-be-part-of-the-process-m700-f700s.115914/

 

[CarlosMRRDesignWheels]

Already in the works guys !!/ we will be releasing a full forged model that will be available in just a couple of days from today and we are also already in the works for a Flow forged model that will not only be light weight but friendly in your pockets just like all of our other OE style models.

 

[CarlosMRRDesignWheels]

Just FYI we got one pre made set of our Forged F6180 in stock / no need to wait 4 weeks/
all you got to do is pick the color and we can ship out.

19x10 5x114.3 35et
19x11 5x114.3 50et

PM me for info/ set will sell fast GT350 style

 

[CarlosMRRDesignWheels]

Look at what just arrived , We made a set for inventory a couple of days ago and we just received the full set yesterday,
We have a New set of Forged F6180 up for grabs / no wait time, ready to go all you as a customer need to do is decide on the finish and we will complete the order for you.
PM me for special in stock offer/

Specs:
19x10 5x114.3 35et 70.3b 20.3lb each
19x11 5x114.3 50et 70.3b 20.6lb each

Current raw pics/

 

[CarlosMRRDesignWheels]

Check this one out guys/ sent by one of our good customers.

FS01 Flow forged / Custom off sets / Custom Red finish

Front: 19×10.5 5×4.5 +25mm offset w/ 285/35/19 Michelin Pilot Sport
Rear: 19×11 5×4.5 +40mm offset w/ 305/35/19 Michelin Pilot Sport

 

[Performance nut]

@CarlosMRRDesignWheels question about the M600 wheels. Is it possible to shave portions of the wheel to make it lighter without compromising its integrity?

For example, if the center cap housing was machined removing material would make it impossible to install a center cap but free up some weight.

Sponsored