Sponsored

Optimum Shift Points

havasu486

Well-Known Member
Joined
Oct 26, 2015
Threads
23
Messages
485
Reaction score
171
Location
Tinley Park, IL
First Name
Ted
Vehicle(s)
2018 Mustang GT350 Electronics Package, Lead Foot Gray
I have a stock '15 GT Performance Pack, thus a 6 speed and a 3.73 gear.

Does anyone know the proper shift points for each gear at the strip?
Sponsored

 

GSLSE20B

Well-Known Member
Joined
Dec 21, 2015
Threads
4
Messages
1,005
Reaction score
289
Location
Fair Oaks , Ca
Vehicle(s)
16 SHADOW BLACK GTPP
I have a stock '15 GT Performance Pack, thus a 6 speed and a 3.73 gear.

Does anyone know the proper shift points for each gear at the strip?
I have a GTPP , I shift at 6800. It's going to depend on your traction between shifts . If you are spinning , shift lower ... If you are bogging shift higher
 
OP
OP
havasu486

havasu486

Well-Known Member
Joined
Oct 26, 2015
Threads
23
Messages
485
Reaction score
171
Location
Tinley Park, IL
First Name
Ted
Vehicle(s)
2018 Mustang GT350 Electronics Package, Lead Foot Gray
I have a GTPP , I shift at 6800. It's going to depend on your traction between shifts . If you are spinning , shift lower ... If you are bogging shift higher
My car is stock, no tune. 6800 would be impossible. Thanks!!!!!!
 

Mikeiscoo2

Well-Known Member
Joined
Aug 19, 2014
Threads
44
Messages
910
Reaction score
161
Location
Fort Myers Fl.
First Name
mike
Vehicle(s)
2015 Mustang GT
roll out of the hole. dont rev the car up and dont mash it when the light goes green. leave the light at idle and slowly get into it for a quick few milliseconds and then mash it. since you dont have a tune your clutch protection system will likely turn on and fuck you anyways so none of this matters until you tune it but.. anyways. dont fast shift 2nd gear you will only wheel hop. depending on your tires you can hard shift 3rd and 4th. at 6800 rpm. even on stock tune. youll most likely run a low 13. if you do it all right. and cut a 2.1-2.3 60 foot.
 
 








Top