Post Pix of your S550 with aftermarket wheels and tires

[Aarron_M]

Apparently the center cap won't go on in the front with the 9.5" -- check the link -- I think Niz did a test fit -- I want to say the center cap was the only issue -- some suggest that could be fixed with a spacer. I'm a little leery of spacers, and everything else that's mostly for appearance -- there may be a slight increase in grip, but not as much of a difference as a good set of tires.

You can also tap in the dust cap with a hammer and gain the clearance needed. I wouldn't sweat a 5mm hubcentric spacer. It's not like you're adding an inch.

Sponsored

 

[MRRDesignWheels]

been awhile

i need steeda progressive springs >.<

Man now that is some tire shine !! looking good :cheers:

 

[Pwnisher]

[ame="[MEDIA=youtube]L1vaG0CUm-A[/MEDIA]"]

A little video I made of my mustang.

 

[Stage_3]

His next mod should be a new phone...

HA HAAAAAAAAAAAAA

 

[Pwnisher]

yeah I'm not sure what the dealio is...the sound/video was fine until I uploaded it to youtube.

 

[Oracle]

Niche M158 Form
20x10.5 with M/T 275/35/20s all the way around.

 

[Joker]

Apparently the center cap won't go on in the front with the 9.5" -- check the link -- I think Niz did a test fit -- I want to say the center cap was the only issue -- some suggest that could be fixed with a spacer. I'm a little leery of spacers, and everything else that's mostly for appearance -- there may be a slight increase in grip, but not as much of a difference as a good set of tires.

I was thinking the fronts could use spacers, but haven't measured it yet to see if it looks the same as the rears or funky

Now I'm considering them also. Really light, inexpensive. I think I'd like to run a square 19x9.5 +40 with 275/40's. I can't imagine that'd be a problem.

Do it, they're so light, the steering is so immediate that it almost makes me feel the steering with the stock wheels had lag lol. Car over all feels more responsive and those fire hawks grip very well.

 

[ronnieb1958]

Man now that is some tire shine !! looking good :cheers:

how about a side shot?...what size wheels and tires?

 

[SnoopisTDI]

Niche M158 Form
20x10.5 with M/T 275/35/20s all the way around.

Those wheels are MADE for Guard. Looks awesome!

 

[Velgen]

Customer submitted photos. Dipped mustang on Velgen Wheels VMB9 Matte Silver 20x9 & 20x10.5

​

 

[Jon|3.7]

how about a side shot?...what size wheels and tires?

275/35/20 squared, 20x10's mrr gf9's similar to the flow forged mrr fs01's but not as lightweight.

 

[Dadsreward]

Rovos Durban

 

[Sixth]

Rovos Durban

Hmmm. I wonder if you can run a squared set up...Seems like you could with the offset they have.

 

[Need4SpeedMotors]

Hmmm. I wonder if you can run a squared set up...Seems like you could with the offset they have.

Its been done, needs a small 3 mm spacer upfront but easily works.

 

[info@trinityautosport]

Some shots of our shop Mustang on Apex and Vorsteiner Wheels.

Apex EC-7 in Race Silver 18x10



Vorsteiner V-FF 101 in Carbon Graphite 20x10 & 20x11

Sponsored