20x10.5 +38 fitment

[Chase0fSpades]

So, I have found a set of wheels I really like, Ferrada FR3's 20x10.5, but the largest offset I can find is +38....

<wheel link here>

This is only about a quarter inch off from the recommended offset of +45 for a 10.5. I am lowering it an inch in the rear, and plan on putting it on 305/30r20 Nitto NT555 G2's if that helps. Maybe if I go with a 295/30?

Sponsored

 

[Quiksilver15]

here read this thread
http://mustang6g.com/forums/showthread.php?t=40082

 

[BigEasyGT]

You may need a very small amount of camber to make that fit but it should be fine. I'm running a 20x10.5 +30 on a 275/35 and I have room to go wider but I'm also on sportlines and -2.5 camber out back.

 

[Chase0fSpades]

I got the CJ Pony Parts lowering kit, which drops it an inch in the rear. Do you know how much this impacts camber? It's the same drop in the rear as the pro kit, but with a greater drop in the front, I believe.

 

[Need4SpeedMotors]

They will work fine brotha Ive done a number of the Ferrada setups im their original dealer on the west coast it fits like a charm.

U actually just did a set of FR1 wheels today on a GT at the shop with 255/295 Invo tires, it came out soo sexy !

 

[Kbreese]

Those wheels look awesome by themselves, the only issue I'd have with them personally is because of their design I'm guessing they will look smaller then that actually are. It's because the spoke extension stops significantly short of the outside lip. But with 20's, probably not that big of a deal.

 

[SheStang]

They will work fine brotha Ive done a number of the Ferrada setups im their original dealer on the west coast it fits like a charm.

U actually just did a set of FR1 wheels today on a GT at the shop with 255/295 Invo tires, it came out soo sexy !

Pictures please, I want to see:eyebulge:

 

[Chase0fSpades]

Pictures please, I want to see:eyebulge:

^+1

 

[Need4SpeedMotors]

My guys are converting the images right now.

 

[Chase0fSpades]

Quick update, got the wheels and tires! It looks great! Went with 305/30's in the rear and 255/35's in the front, Nitto NT555 g2's. Check it out!

Edit: picture isn't linking properly... here is the imgur link.

 

[Need4SpeedMotors]

Looking good man.

 

[Jeff's FRC]

Quick update, got the wheels and tires! It looks great! Went with 305/30's in the rear and 255/35's in the front, Nitto NT555's. Check it out!

Edit: picture isn't linking properly... here is the imgur link.

Looks great! Can you post more pictures? How stretched is the front tire? It doesn't look bad at all, I would have thought a 255 on a 10.5" wide wheel would be pushing it. If they indeed are a 255 like you said I'm gonna get the same tire for my 10" wide front wheels.

 

[Chase0fSpades]

The 255's are on a 9" wheel, my bad, should have clarified! I went staggered.

 

[Jeff's FRC]

The 255's are on a 9" wheel, my bad, should have clarified! I went staggered.

I kinda figured after looking closer again and seeing the fronts weren't as concave as the rear. How you liking the tires? I'm gonna run the same

 

[Need4SpeedMotors]

the 255 and 9 is fullsize no stretch from the looks of it and the 305/30 is nicely fitted on the 10.5

Sponsored