Robby
Well-Known Member
- Joined
- Feb 10, 2016
- Threads
- 4
- Messages
- 129
- Reaction score
- 14
- Location
- Munich, Germany
- Vehicle(s)
- '16 DIB 2.3T
- Thread starter
- #1
Easy job right? Only 2 bolts. Right? Well they just wouldn't line up. Either I would get the top one in and the bottom wouldn't or I would get the bottom one in and the top not. Despite jacking in various places, body, under the knuckle, rubber mallet, pry bar etc.----Just a total NOGO! And mine didn't come with any grease.
After 3 Hours I gave up and decided to put the OEM part back on. Bolted right in and torqued to spec. Took all of 2 minutes. Wasted afternoon. Very disappointed. Was going to install the sub-frame brace, but had no more time nor patience for Steeda today.
After 3 Hours I gave up and decided to put the OEM part back on. Bolted right in and torqued to spec. Took all of 2 minutes. Wasted afternoon. Very disappointed. Was going to install the sub-frame brace, but had no more time nor patience for Steeda today.
Sponsored