Project Whitemare
GTFO Squad
- Joined
- Nov 12, 2014
- Threads
- 43
- Messages
- 1,309
- Reaction score
- 1,011
- Location
- Bay Area
- Website
- www.instagram.com
- First Name
- Nick
- Vehicle(s)
- 2015 Mustang GT/PP
- Thread starter
- #1
STEEDA ULTRA LITE CHASSIS JACKING RAILS
Tools Needed:
15mm Socket
3/8" Drive Ratchet
Difficulty Level:
1 out of 12 Beers
Parts List:
(1) Driver's Side Rail
(1) Passenger Side Rail
(8) 15mm Bolts
Preparation:
Installation can be performed while vehicle is on the ground.
Video:
[ame]
Installation:
Remove and Discard the (2) 15mm bolts that lay just inbound of the factory pinch weld towards the front of the vehicle
Remove and Discard the (2) 15mm bolts that are toward the rear
Remove the Bubble Wrap and Plastic Wrap from the Rails
Note: Jacking Rails will only fit one-way. Orient them so that the wedge is towards the center of the vehicle.
Lift the Jacking Rails into place and using the supplied 15mm bolts, torque them down with firm pressure
Repeat the process for the other side
Installation Complete!
Sponsored
Last edited: