I used 23mm on the rear 25mm up front when i had performance pack wheels. No cutting of the studs required.Just put on some Steeda progressives. Now I need to space the wheels a bit. 25mm is too much for me and it looks like with 20mm and your cutting studs. Anyone make a 23mm and do those clear the studs?
Sweet, thank you!I used 23mm on the rear 25mm up front when i had performance pack wheels. No cutting of the studs required.
Is that a Maryland license plate I see? Love the ingot with the nickel wheelsSteeda. That is all.
Yep. Those are the factory PP wheels. For now at least.Is that a Maryland license plate I see? Love the ingot with the nickel wheels
Right on, you don’t see too many of those. I saw you were in the R357 thread, possibly those?Yep. Those are the factory PP wheels. For now at least.
Yep that was me. Those are my new targets. I would like a 19x10 flush square or a 19x10/11 staggered. I was leaning heavily at 10” squared. But I’m not such a die hard performance enthusiast that I won’t do a staggered setup. The 18 PP2, GT350s and Bullet as well as the Steeda Q500 are all staggered and I haven’t heard people complain about that setup. So maybe it’s not as a must have as some make it out to beRight on, you don’t see too many of those. I saw you were in the R357 thread, possibly those?
PREACH! I have gt350 wheels/tires on my car and I don’t mind at all. I was pretty set on a square set up but couldn’t pass up the deal for the gt350 wheels/tires. It would be nice to be able to rotate but it’s jot a issue really. My wheel to fender gap is a little smaller in the rear due to the larger diameter tire but it’s not so badYep that was me. Those are my new targets. I would like a 19x10 flush square or a 19x10/11 staggered. I was leaning heavily at 10” squared. But I’m not such a die hard performance enthusiast that I won’t do a staggered setup. The 18 PP2, GT350s and Bullet as well as the Steeda Q500 are all staggered and I haven’t heard people complain about that setup. So maybe it’s not as a must have as some make it out to be
Disregard question, I just went to their website and it answered my questionHere's one from the track this weekend. Steeda Ultra Light springs and Project 6GR 19x11 square with Toyo R888R 305/30-19